Synergy Telecom Private Limited

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

 
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-0-11GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
2.1MAX
 
 
 
 
 

Mechanical Cheracteristics:
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

The term "TNC F 4 HOLE LMR 100 CRIMP1" defines a specific RF connector type. Here's the breakdown of its meaning:

1. TNC: This represents the connector type, Threaded Neill–Concelman, which is a threaded, weatherproof RF connector used for medium to high-frequency applications.
2. F: Indicates the gender of the connector, in this case, Female.
3. 4 HOLE: Refers to the mounting style of the connector, which features a four-hole flange, designed to secure the connector onto a surface or panel.
4. LMR 100: Specifies the cable type compatible with this connector, LMR 100, a low-loss coaxial cable commonly used in RF applications.
5. CRIMP1: Denotes the termination type, specifically a crimp-style joining method for connecting the cable to the connector.

This type of connector is typically used in applications that require reliable and durable RF connections, such as:

• Wireless communication systems
• Antennas and radio equipment
• Defense and aerospace applications

Its robust design ensures stable performance, even in challenging environments.

These are RF connectors with a threaded coupling mechanism, typically used for higher-frequency signal transmission (up to 11 GHz or more), and the "4-hole" usually refers to a 4-hole panel mount flange for secure attachment to equipment enclosures or panels.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Rf cable assemblies
jumper cable assmbalies
ipx cable
ufl cable

test cable

antenna cable

feeder cable

if cable

signal cable

utp cable,

stp cable

TX CABLE

RX CABLE 

•             Antenna

•             RF Connector

•             Coaxial Cable Assembly

•             TNC Connector

•             RF Adaptor

•             SMA Connector

RF Cable

RF Adapters inseries sma tnc din

DIN Connector

•             SMB Connector

•             Telecom Cables

  RF COAXIAL Connectors
Antenna IOT

BNC Connector

N Connector

Microwave Components

SFP Optical Transceiver

Telecom Tools

•             RF Cables

•             Gsm Antenna

•             Feeder Clamp

•             Cable Management Tools

•             Rj-45 Connector

•             Balun bnc smz rj45 50 75 120 600

•             Solar PRODUCT Installation Material

Gps Antenna

Omni Antenna

Rubber Mastic Tape

•             rf Coupler

•             RF Surge Arrestors

•             GPS Accessories

 Crimping Tools telecom tools Pliers

L9 Connector

 Rf Coaxial Cable

Test & Measuring Instruments

RF Power Splitters

uy Connector DB9 DTYPE
smp rf connector

Signal Cable telephone cable 

smp rf connector

Signal Cable telephone cable

Vhf Antenna hf uhf

Distribution Box KRONE

lan stp Coaxial Wires

Gps Antennas

Base Station Antenna

Cctv Bnc Connectors

Dummy Load

wifi Radio ism

Antenna Connectors

leaky Feeder cable Clamp

4g Antennas 5g 

Gps gsm antenna lpda

Drop Wires

Mimo Antenna

RG Coaxial Cable

Antenna FOR Two Way Radio VHF

rf Coaxial Cables assemblies

Dipole Antenna

Antenna Feeder CABLE AND Accessories

FEEDER Jumper CABLE

emi shielding rf absorver material

RG Rf Coaxial Cables

Feeder Cable Clamps

• Gsm Magnetic Antenna

Cat 6 Ethernet Cable lan rj45

Optical Fiber Path Cord

Krone Module And Tool

Antenna vswr test

• Sma Adapter

Mobile Antenna

SUPPER Flex Cable

Gsm Ceiling Antenna

Rf Coaxial Cable Assembly

• Antenna Magnetic GSM

• Power Sensor

• RF Directional Couplers

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

• Type: Right-Angle (R/A) TNC Female

• Style: Crimp termination

• Cable: LMR-240 (6.1mm/0.240" OD)

• Impedance: 50Ω

• Right-angle design saves space in tight installations

• Hex crimp provides 360° shield contact

• Nickel-plated brass body for durability

• Frequency range: DC to 6GHz

• Requires LMR-240 crimp tool

• Strip length: ~9.5mm (verify exact spec)

• Center conductor protrusion: 1.5-2mm

• Crimp sequence: center pin first, then shield

• VSWR: <1.3:1 typical

• Insertion loss: <0.3dB @ 3GHz

• Mating cycles: 500+

• Cellular antennas

• RF test equipment

• Tight-space installations

• Short jumper cables

Note: Always perform pull test after crimping. For outdoor use, apply weatherproofing.

• Type: TNC Male (Standard Pin)

• Cable: 1/2" Feeder Cable (50Ω, ~13mm OD, e.g., LDF4-50A, Andrew Heliax)

• Impedance: 50Ω

• Mounting: Clamp or Compression Type

• Heavy-Duty Design for rigid coaxial feeders

• Weatherproof Seal (O-ring/gasket for outdoor use)

• Material: Brass body with nickel plating

• Frequency Range: DC–6 GHz

• VSWR: <1.25:1 (typical)

• Tool: Requires 1/2" feeder cable crimp/compression tool

• Steps:

  1. Trim cable to exact length

  2. Insert center conductor & crimp

  3. Compress outer conductor for shield contact

• Torque: 15–20 in-lbs for mating

• Cellular base stations

• Microwave links

• Broadcast transmitters

• High-power RF systems

• ⚠️ Not for flexible cables (designed for semi-rigid feeders)

• Use anti-seize compound for aluminum cables

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

• Connector Type: TNC Female (TNC(F))

• Cable Compatibility: LMR-200 (50Ω, 0.195" OD/4.95mm)

• Termination: Crimp-style (shield and center conductor)

• Key Features:

  • 50Ω impedance (0-6 GHz optimal performance)

  • 4-hole crimp design for superior shield grip

  • Nickel-plated brass body for weather resistance

  • PE dielectric for stable RF performance

• Applications:

  • Base station antennas

  • Wireless communication systems

  • RF test equipment

  • Outdoor installations

Installation Note:

• Requires LMR-200 specific crimp tool

• Recommended torque: 12 in-lbs for proper mating

• Weatherproofing recommended for outdoor use

• Type: TNC Female Reverse Polarity (R/P-TNC(F))

• Cable: LMR-200 (50Ω, 4.95mm/0.195" OD)

• Impedance: 50Ω

• Polarity: Reverse (female center pin)

• FCC-Compliant for WiFi/consumer RF devices

• Crimp-style termination (shield & center conductor)

• Nickel-plated brass body

• Frequency Range: DC to 6 GHz

• VSWR: <1.3:1 (typical)

• Tool: Requires LMR-200 crimp tool

• Strip Length: ~9.5mm (verify exact spec)

• Crimp Steps:

  1. Center conductor crimp

  2. Shield braid fold & crimp

• Torque: 10–12 in-lbs for mating

• WiFi routers/CPEs (FCC Part 15 compliance)

• IoT/wireless sensors

• Small-cell antennas

• UAV/drone communications

• ⚠️ Not compatible with standard TNC (reverse polarity prevents mating)

• Weatherproofing recommended for outdoor use

• Type: TNC Male (Standard Pin, 50Ω)

• Cable Compatibility: LMR-240 (50Ω, 6.10mm/0.240" OD)

• Termination: Clamp-Style (Tool-Assisted Compression)

• Frequency Range: DC–6 GHz

✔ Radial Clamp Mechanism

• Ensures uniform pressure for optimal shield contact

• Integrated strain relief for cable jacket

✔ Robust Construction

• Nickel-plated brass body (corrosion-resistant)

• PTFE dielectric (low signal loss)

✔ Performance

• VSWR: <1.30:1 (typical)

• Insertion Loss: <0.3 dB @ 3 GHz

• Mating Cycles: 500+ (MIL-STD-348 compliant)

✔ Environmental Protection

• IP67-rated (with proper installation)

• Operating Temp: -40°C to +85°C

Required Tools:

• LMR-240 clamp tool

• Cable stripper (strip length: 10mm ±0.5mm)

Installation Steps:

1. Strip Cable:

   • Outer jacket: 10mm

   • Braid: Fold back over clamp base

   • Center conductor: 2.5mm protrusion

2. Assemble Connector: Insert cable into clamp mechanism

3. Compress: Use tool to secure shield & jacket

4. Torque: 12–15 in-lbs for connector mating

Critical Checks:

• Ensure no braid strands contact center conductor

• Verify O-ring seal (for weatherproofing)

• Wireless Base Stations

• RF Test Equipment

• Public Safety Radios

• Outdoor Antenna Systems

• Standards: MIL-STD-348, RoHS/REACH compliant

• Warning:

  • For LMR-240 only – verify cable OD before installation

  • Avoid over-torquing (may damage O-ring seal)

1. Basic Specifications

• Connector Type: TNC Male (Standard 50Ω)

• Cable Compatibility: LMR-400 (10.3mm/0.405" OD)

• Termination Type: Hex Crimp (dual-stage: center conductor + shield)

• Frequency Range: DC to 6 GHz

• VSWR: <1.20:1 (typical)

• Impedance: 50Ω ±1Ω

2. Key Features

• 6-point hexagonal crimp for uniform 360° shield contact

• Nickel-plated brass body with corrosion-resistant finish

• PTFE dielectric (εr=2.1) for optimal RF performance

• Integrated strain relief for cable retention

• Mating cycles: 500+ (MIL-STD-348 compliant)

3. Installation Requirements

• Tools Needed:

  • LMR-400 specific crimp tool (e.g., Times Microwave CT-438)

  • Cable prep tool (strip length: 16mm ±0.5mm)

• Crimp Sequence:

  1. Center conductor crimp (3.0mm protrusion)

  2. Braid trim (45° angle) and fold-back

  3. Outer shield crimp (60-70 lbs force)

• Torque: 20 in-lbs for connector mating

4. Performance Data

• Insertion Loss:

  • 0.15 dB @ 2 GHz

  • 0.30 dB @ 6 GHz

• Pull Strength: >150N (properly installed)

• Temp Range: -40°C to +85°C

• Maximum Power: 1.5kW @ 1GHz

5. Typical Applications

• Cellular base station antennas

• High-power RF transmission systems

• Broadcast equipment

• Military field deployable systems

6. Compliance & Notes

• Standards: MIL-PRF-39012, RoHS 3 compliant

• Weatherproofing: Requires silicone sealant for outdoor use

• Note: Always perform:

  • Continuity test

  • VSWR verification after installation

Tooling Note:
Use only manufacturer-specified crimp dies (typically 0.405" die set) to prevent cable deformation.

(For complete insertion loss charts or TDR reports, request test data.)

Available Variants:

• Bulkhead mount

• Right-angle configuration

• Reverse polarity (RP-TNC) versions