Synergy Telecom Private Limited

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS 

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS 

A Flexible Twistable Waveguide for WR137 is a specialized waveguide designed for applications requiring both bending and twisting. Operating in the 5.95 GHz to 8.2 GHz range, it is commonly used in wireless infrastructure, radar systems, and military applications. The waveguide allows for flexible placement of rigid components while maintaining low insertion loss and VSWR. It features a vulcanized rubber jacket for durability and nickel-plated brass flanges for secure connections. With a maximum twist of 203 degrees per meter, it provides adaptability in complex RF setups. This waveguide is ideal for microwave radio systems, 5G communications, and research applications.

The WR-187 to N Female waveguide-to-coax adapter is a popular component for transitioning signals from rectangular waveguides (typically 3.95–5.85 GHz) to coaxial systems. Here are a few standout options:

• Pasternack PE9822: Right-angle design, CMR-187 flange, 50 Ohm N Female connector, operates from 3.95 to 5.85 GHz. Priced around $760 USD for single units.
• Fairview Microwave SMW187ACNG: PDR48 standard flange, aluminum body, right-angle, 3.85 to 5.85 GHz, with a VSWR of 1.25:1.
• HASCO HWCA-187NF-RA: UG1480/U flange, 6061-T6 aluminum, right-angle, 3.95 to 5.85 GHz, priced at $391.50 USD.

The Waveguide High Power Termination WR284 is a specialized RF component designed for high-power microwave applications. It operates within the 2.5–3.5 GHz frequency range and features a WR284 waveguide type with an FDP32 (cover) flange. Constructed from aluminum, it has a chromate conversion inside finish and an anticorrosion black paint exterior. The termination supports 300W continuous wave (CW) power handling and maintains a VSWR of 1.20. With a temperature range of -30°C to +70°C, it is built for durability and reliability in demanding environments. This component is widely used in radar, satellite communication, and high-power RF systems.

The 698–4000 MHz 4 Way Power Splitter is a premium wideband RF power divider designed for reliable signal distribution in telecommunications and wireless infrastructure. Engineered to support the full 698–4000 MHz spectrum, this splitter is ideal for 2G/3G/4G/5G, LTE, PCS, AWS, and other broadband applications.

Built with a reactive design for efficient signal handling, it provides four equal output ports with excellent isolation and low insertion loss. The splitter uses N-female connectors and a rugged coaxial metal housing for durability in demanding environments. With 50Ω impedance matching, it ensures stable performance with standard telecom equipment.

A bias tee is a three-port network used for setting the DC bias point of some electronic components without disturbing other components.
Smart bais tee is used to insert DC power into an AC signal

A high power antenna is designed to transmit and receive signals at high power levels across various frequency bands. It is built from durable materials to withstand environmental conditions and maintain reliable performance. These antennas play crucial roles in broadcasting, telecommunications, radar systems, and scientific research, enabling long-distance communication and precise signal transmission. Their ability to handle high power levels makes them essential in applications where robust and efficient communication is necessary.

Antennas

Synergy Telecom Pvt Ltd is a leading provider and manufacturer of Telecom Equipment, Antennae, Cable assemblies, Microwave Components, IoT and M2M learning, IOT, RFID, SMART CITY, HIGH SPEED TRAINS RAILWAY NETWORK, DAS/ IBS and BTS installation materials, Solar passive components, and solutions. We focus on research and production and maintain a large inventory of fast-moving materials like Cable, Cable Assemblies, Connectors, Passive RF components, and Installation materials. We are approved vendors of BEL, ITI, DRDO, RAILWAYS, ISRO, Private Telecom Operators, BSNL. We believe in creating value for our customers by continuous improvement of products, service quality, and customer satisfaction.

Flexible or twistable rectangular waveguides are crucial components in modern RF and microwave systems, offering the ability to transmit high-frequency signals with minimal loss while providing flexibility in installation and operation. They find applications across various industries, from military and aerospace to telecommunications and medical fields, where reliable transmission of electromagnetic waves is essential. These waveguides are designed with specific materials and dimensions to ensure optimal performance in diverse and often challenging environments.

Low and high power waveguide circulators serve distinct roles in RF and microwave systems based on their power handling capabilities and construction. Low power circulators are suitable for moderate power applications where compact size and efficient signal routing are priorities. In contrast, high power circulators are designed for applications requiring robustness, high power handling, and reliable performance under demanding conditions. Both types play crucial roles in ensuring signal integrity, isolation, and directionality in various communication, radar, and industrial applications where RF signal management is essential.

Electrical Characteristic Impedance 50 ohm Frequency Range DC-11 GHz VSWR 1.15@DC-6 GHz Dielectric Withstanding Voltage 1000V RMS,50Hz,at sea level Dielectric Resistance 5000M Contact Resistance Center Contact 1m Outer Contact 0.25m________________________________________________________________________________ Mechanical Durability Mating Cycles 500 ________________________________________________________________________________ Material and Plating Material Plating Body Brass Ni Insulator PTFE(Teflon) Center conductor Phosphor Copper Au ________________________________________________________________________________ Environmental Operating Temperature Range -40+85 RoHs Compliant

Synergy is Indian Antenna and RF Co-axial Cable assembly manufacturer. We deal in rf connector, rf Co-axial Cable, all types of antenna, antenna cables, jumper cables, microwave components, Attenuator, dummy loads, dc block, splitter, Duplexer, Couplers, Combiners, low pim test cables, tools, Ibs n DAS product, GPRS, rfid product's, Iot products, and 5g products for smart city,, pls confirm if any enquiry across..

The Agilent 8481H thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A, and the discontinued 43x power meters and provides extraordinary accuracy and stability. The 8481H power sensor gives you extremely low SWR and is traceable to the U.S. National Institute of Standards and Technology (NIST). A calibration port is included with the above power meters for calibration with the power sensor. This calibration provides traceability to NIST and it eliminates the uncertainties due to temperature changes and the variance in making measurements with different meter/sensor combinations. For Wide Dynamic Range Power Measurements to +30 dBm, the E-Series E9300H is recommended.

HP 85032B – Type-N Calibration Kit (DC to 6 GHz)

This kit contains a set of precision open, short, and load standards, specifically engineered for calibrating network analyzers when measuring devices with 50-ohm Type-N interfaces. It is widely used in RF and microwave labs for ensuring measurement accuracy and repeatability.

🔍 Key Features:

• Connector Type: Type-N (male and female)
• Impedance: 50 Ω
• Frequency Range: DC to 6 GHz
• Calibration Standards:
  • Open (male and female)
  • Short (male and female)
  • Load (male and female, broadband, instrument-grade)
• Optional Adapters: Precision phase-matched 7 mm to Type-N adapters for non-insertable device calibration
• Construction:

• Rugged internal structure for repeatable connections
• Low-dielectric plastic in opens to minimize compensation
• One-piece shorting plane design for high repeatability
• Tight control of pin depth to reduce phase errors

This kit is ideal for calibrating Keysight/Agilent/HP network analyzers, and although now obsolete, it remains a trusted tool in many RF labs due to its mechanical precision and broadband performance

The HP 85032B is a Type-N mechanical calibration kit designed for use with network analyzers operating from DC to 6 GHz. It’s built for 50-ohm systems and includes precision standards to calibrate devices with Type-N connectors. Here's what typically comes in the kit:

• Open circuits (male and female)
• Short circuits (male and female)
• 50-ohm terminations (male and female)
• Optional 7 mm to Type-N adapters for non-insertable devices

This kit is known for its high repeatability and mechanical stability, making it a staple in RF and microwave labs. It’s officially obsolete but still widely available on the secondary market.

If you're looking for a modern replacement, the Keysight 85032F is the current equivalent. Want help comparing specs or checking availability?

The Waveguide Rotary Joint Single L-Type ST70WRSCFDP70 is a crucial microwave component that enables signal transmission between rotating and stationary parts. It features WR137 waveguide type with an FDP70 (cover) flange and is built using copper with silver plating inside and anticorrosion black paint outside. Operating in the 5.8 - 6.725 GHz range, it has a maximum VSWR of 1.25 and insertion loss of 0.3 dB, handling 100 W (CW) and 1 KW (Peak) power. It is L-shaped, weighs 1.6 kg, and operates from -30°C to +70°C. Ideal for radar and communication systems, it ensures high efficiency and reliability.

This calibration kit is part of Rosenberger’s RPC-N series, tailored for 50 Ω N-type connectors. It supports a broad frequency range and is engineered for accurate and repeatable VNA calibration in laboratory and field environments.

🔧 Key Features:

• Connector Type: N-type (RPC-N)
• Configuration: Full version
• Calibration Standards Included:
  • Open
  • Short
  • Load
  • Thru
  • In-series adaptors
  • Torque wrench and gauges
  • Sliding loads for variable measurements
• Frequency Range: Typically supports up to 18 GHz or higher, depending on the specific RPC-N implementation
• Impedance: 50 Ω

📦 Package Includes:

• All mechanical calibration standards
• Accessories for proper torque and connector care
• Delivered in a compact, rugged case with a standard definition card
• Comes with a factory calibration certificate; DAkkS-certified calibration available as an option

This kit is ideal for engineers and technicians who require high-accuracy S-parameter measurements and traceable calibration standards for N-type interfaces.

A 4-in-2-out hybrid coupler / 4:2 combiner is a passive RF network used to combine four RF input signals into two output ports with controlled phase and amplitude characteristics and minimal distortion. This type of device is widely used in Distributed Antenna Systems (DAS), cellular base station feeding networks, 5G/LTE/UMTS systems, and multi-band RF installations.

Unlike simple splitters or power dividers, hybrid couplers ensure good isolation between input channels and maintain consistent power combining over a wide frequency range.

Frequency - 136-174Mhz
Frequency separation - 4-7Mhz
Insertion Loss - ≤ 1.2 dB
Isolation - ≥ 75 dB
Return Loss - ≥18 dB
Connectors - N / UHF Female
Power - 50W
Dimensions - 32*155*198mm
Weight (approx.) - 1.2kg
Operating Temperature - -10 To + 60 deg C

SYNERGY TELECOM PVT LTD 
IOT, RFID, SMART CITY, HIGH SPEED TRAINS RAILWAY NETWORK, DAS/ IBS and BTS installation materials, Solar passive components, and solutions. We focus on research and production and maintain a large inventory of fast-moving materials like Cable, Cable Assemblies, Connectors, Passive RF components, and Installation materials. We are approved vendors of BEL, ITI, DRDO, RAILWAYS, ISRO, Private Telecom Operators, BSNL. We believe in creating value for our customers by continuous improvement of products, service quality, and customer satisfaction.

We provide products from dc through microwave and milli-meter wave frequencies to our international commercial and military customers who are involved in high-frequency industries including radar, communications, high energy physics, satellites, industrial heating, medical electronics, etc.

Established in 2000, Synergy Telecom has developed and maintains long-term high integrity relationships with many manufacturers throughout India and with many customers throughout the world.

We are unique in our industry because we do not limit ourselves to the provision of hardware; we take pride in providing technical consultation and engineering advice, working with our worldwide customers to solve their problems.

We conform to INDIAN Government export regulations and for the security of both customer and manufacturer alike; provide complete commercial, engineering and logistics support.