Synergy Telecom Private Limited

LMR 600 Coaxial Cable

Frequency - DC-6Ghz
VSWR - 1.5
Impedance - 50ohm
Max. Power Hand - 100w

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination. RF Feeder cable
Gain:- best
quick delivery.
VSWR:- Best.
best quality.

RG 179 BU flexible coaxial cable
 Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:
Resistant to corrosion
Perfect finish
Long lasting life

#ipx cable
#ufl cable
#test cable
#antenna cable
#feeder cable
#if cable
#signal cable
#utp cable,
#stp cable
#lan cable
#wan cable
#internet cable
#INTERNAL CABLE.
#INTERFACE CABLE.
#TX CABLE
#RX CABLE
#innovation #india #future #manufacturing #strategy #supplychain #warehousing #environment #sustainable # #complexity #fashion #shipping #fashionindustry #economy #textile #textiles #china #egypt #environmental #taxes #bangladesh #bangladesh #wastemanagement
• #Antenna
• #RF Connector
• #Coaxial Cable Assembly
• #TNC Connector
• #RF Adaptor
• #SMA Connector
• #RF Cable
• #RF Adapters inseries sma tnc din • #DIN Connector • #SMB Connector • #Telecom Cables • #RF COAXIAL Connectors • #Antenna IOT • #BNC Connector • #N Connector • Microwave Components • SFP Optical Transceiver • Telecom Tools • RF Cables • Gsm Antenna • Feeder Clamp • Optical Fiber Products • Cable Management Tools • Rj-45 Connector • Balun bnc smz rj45 50 75 120 600 • Solar PRODUCT Installation Material • Gps Antenna • Omni Antenna • Rubber Masti…
[12:48, 31/10/2022] Pradeep: #ipx cable
#ufl cable
#test cable
#antenna cable
#feeder cable
#if cable
#signal cable
#utp cable,
#stp cable
#lan cable
#wan cable
#internet cable
#INTERNAL CABLE.
#INTERFACE CABLE.
#TX CABLE
#RX CABLE
 
• #Antenna
• #RF Connector
• #Coaxial Cable Assembly
• #TNC Connector
• #RF Adaptor
• #SMA Connector
• #RF Cable

Item Material Diameter ( inch ) Diameter ( mm )Center Conductor Solid Bare Copper 0.0370 inch 0.94 mmDielectric Foamed Polyethylene 0.110 inch 2.79 mmInner Shield Sealed APA Tape 0.116 inch 2.95 mmOuter Shield 36AWG, 95% Tinned Copper Braid 0.138 inch 3.50 mmJacket Black PE 0.195 inch 4.95 mm

 
Synergy offering include
RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.
RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 10/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.
RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.
RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.
RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna
Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS
Waveguide Products: Straight, Bend, Twist, flexible, elliptical waveguides and waveguide parts like Tee, Transitions, Loads, Couplers, Isolators, Joints, Shorts etc.
Telecom Equipment: Complete range of telecom access equipment that include Wireless Home Gateways, Portable Hot Spot, M2M modules and solutions, Indoor and Outdoor Routers based on GSM, WCDMA and LTE Technologies.
Electronic Instruments: High end test equipment like LOW PIM Testers, Communication Test Sets for 2G/3G/4G.
Tools:  Complete range of tools, tool kits, and electronic instruments like Multi-meters etc. from reputed Taiwan Company.
Solar: Solar connectors(MC4, MC4 branch, diode connectors, fuse connectors, tools including crimping tools including hydraulic, wrench, cutting tools), DC and AC solar UV protected cables and cable assemblies.
Optical: All optical fibers, connectors and their patch chords, pigtails, attenuators, FDMS.
ODN (passive Optical Distribution Network): LIU/FMS (Rack Mounted, Fixed/Sliding Type, 6F/12F, 24F, 48F, 96F), PLC Splitters (Cassette , Steel Tube, ABS), FBT Couplers (All Ratios), Fiber Distribution Box & Fiber Termination Box (Wall & Pole Mount), HTB (Home Termination Box), ODF (64F to 1024F & Higher), Joint Enclosures, Patch Cords, Pigtails, Optical Connectors, Adaptors, Attenuators and all FTTH Accessories. 
Active PON: GPON OLT (8 Port), GPON ONT (Single Band & Dual Band), xPON ONT (Single & Dual Band). These are from major brands and tested in major Telco's networks. 
T&M: Optical Power Meter, OTDR, Splicing Machines (representing known brand)

Features and Benefits:

• Optical Fiber: G.652D, G.657A1/A2, G.652B
• Optical Fiber Cable: G2F/4F/6F/12F Unitube Cable, Multitube Cable, Tight Buffer (used for Patch Cords), ADSS, CIPRI and all structures as per the specifications (Representing major manufacturers)
• Optical Preform: G.652D, G.657A1/A2

Item Material Diameter ( inch ) Diameter ( mm )

Center Conductor Solid Copper Clad Aluminum Wire 0.1091 inch 2.77 mm

Dielectric Foamed Polyethylene 0.285 inch 7.24 mm

Inner Shield Sealed APA Tape 0.292 inch 7.42 mm

Outer Shield 34AWG, 90% aluminium Braid

Braid

0.320 inch 8.12 mm

Jacket Black PE 0.405 inch 10.29 mm

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335

• Impedance: 50 ohms

• Cable Colour: Black

• Outer Diameter: 4.95 mm

• Jacket Material: Black Polyethylene (PE)

• Dielectric: Foamed Polyethylene (FPE)

  • Diameter: 2.79 mm

• Inner Conductor: Solid Bare Copper

  • Diameter: 0.94 mm

• Inner Shield: Unsealed APA (Aluminium-Polyester-Aluminium) Tape

  • Diameter over dielectric: 2.95 mm

• Outer Shield: Tinned Copper Braid

  • Gauge: 36 AWG

  • Coverage: 95%

  • Diameter over shield: 3.50 mm

• Well-suited for RF communications, CCTV, wireless systems (WLAN/Wi-Fi), GPS, and antenna feed lines.

• Designed for both indoor and outdoor installations, with a robust PE jacket for environmental protection.

• Excellent signal integrity with a solid bare copper conductor

• Superior shielding with APA tape and high-coverage 95% tinned copper braid

• Low-loss performance due to foamed dielectric

• Durable UV-resistant jacket enhances outdoor reliability

• Compatible alternative to LMR-195 and similar 50-ohm cables

BT 3002 is a shielded twin-core telecommunications/data cable widely used in control systems, voice/data signaling, and low-voltage analog/digital transmission. It consists of two stranded tinned copper conductors (typically 0.5 mm²), each individually insulated with PVC, twisted into a pair, and enclosed in an overall aluminum foil screen with drain wire and PVC outer sheath. The shielding ensures good protection from electromagnetic interference (EMI), making it ideal for industrial signal and control applications.

half inch LDF cable.
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination. RF Feeder cable
Gain:- best
quick delivery.
VSWR:- Best.
best quality.

We are the leading supplier and manufacturer of Cable and providing the quality products to our client.Patch Panel, Omni Antenna, RFID Antenna, LPDA, 5G,4G, IOT Antenna,
 MIMO Patch Antenna, MIMO Omni Antenna, TETRA BAND ANTENNA,
 GSM Rubber Duck , Whip Antenna, GSM Magnetic Base Antenna,
 GPS Antenna, GPS & GSM Combo Antenna,
 Yagi Antenna, Grid Antenna, HF, VHF, UHF Antenna, HORN ANTENNA,
RF Cable 5
Feeder Cable, Leaky Cable, Antenna Cable, JUMPER CABLE
 HLF, RG Cable, BT Cable, LMR CABLES
 High Frequency, Testing Cable, Semi Rigid Cable, Suco FORM Cable,
 Internal Cable, UFL CABLE, SMA CABLE ASSEMBLIES, 
 Lan, PCM ,TELEPHONE, DATA, HDMI Cables
RF Cable Assembly 2
 SMA To SMA Cable,  N to N Cable, BNC To BNC Cable,  TNC to TNC Cable, Testing Cable, Phase stable cable, Antenna Testing Cable, Internal Cable,  UFL CABLE,  MMCX, N, SMA CABLE ASSEMBLIES, 
 RF Connector 8
 N, DIN, MINI DIN Connector, TNC, BNC Connector,
 BMA Connector, QMA Connector, QN Connectors,
SMA, SAA, SSMA, SMB, SMZ, SMC, SMP Connector, SSMB Connector,
 UFL & IPEX Series Connector, MCX Connector, MMCX Connector,
 F Connector, FME Connector, TQ, BQ, Microdot, UHF Connector,
 UY Connector, Fakra Connector, C Connector, CRC9 Connector, TS9 Connector,
 EIA Flange Connector, Tri-axial Connector, Circular Connector,
 M4 Connector, L9 Connector, KMX3 Connector, HN Connector, LEMO CONNECTORS,
 
 IBS & BTS Installation Components 4
 Antenna, Cable, Cable Assembly, Connector, Attenuator, Dummy Load & Termination
 ANTENNA , Splitter, Coupler, Combiner, Duplexer, Tri-plexer, POI, RF Switch, DC Block, Surge Arrestor, 5G Products, Tetra Band Products
 Feeder Clamp, EARTHING KIT, Balun, KRONE MODULES,
 
 High Frequency Components 4
 Connector, Adaptor, RF Cable, Cable Assembly,
 Splitter, Coupler, Combiner, DC Block, Attenuator, DUMMY LOADS,
 Microwave Waveguide Components, WAVEGUIDE ADEPTORS, WAVE GUIDES, FLEXIBLE WAVE GUIDE, ELLIPTICALE WAVE GUIDE, HORN ANTENNA, 
 
 
Microwave Components 1
 Attenuator, Variable Attenuator, Splitter, Combiner, Dummy Load  & Termination, DC Block,
 Bias Tee, Shield Box, Surge Arrestor, Balun
 
 Testing & Measurement Equipment 1
 Site Master,  Vector Network Analyzer,  Spectrum Analyzer,  RF Signal Generator, Calibration Tool Kit,  RF Power Meter, FREQ,  BER TESTER,   CALIBRATION OF T&m,  USED AND REFURBRISH EQUIPMENTS
Antenna, Jumper, Low PIM test cables, IBS and DAS PRODUCTS, MW COMP, Att, Dummy loads, DC block, Splitter, Duplexer, Couplers, Combiners, RF connector, RF Co-axial Cable, TELECOM tools, GPRS, RFID , IOT, and 5G products for Smart city.

Coaxial CableImpedance - 75ohmColour - BlackInner Conductor- Bare Copper - 0.31mmDielectric- Solid PE - 1.95mmOuter Shield - Double Tiined Copper Wire - 85%(16/5/0.1)Jacket - PVC - 3.5mm

RF Cables: -LMR 100, LMR 200, LMR 240, LMR 300, LMR 400, RG 6, RG 11, RG 58 , RG 59, RG 142, RG 174 RG 178, RG 179 , RG188, RG 213, RG 214, RG 217, RG 223, RG8, RG 316 (D/S, S/S), RG 400, 1.13mm,  Suco 141, Suco 0.86, RG 402, RG 405, SS 402, SS 405, LL 120, LL 142 , LL 335, 1/2'', 7/8'', 1-1/4'', 1-3/8'', 1-5/8'' , LEAKY radiating type etc.

Inner Conductor 9.1Dielectric 22.5Outer Conductor 24.8Jacket 27.5PerformanceProperties DetailsCutoff Frequency 5.3 GHzCharacteristics Impedance 50ΩMaximum operating frequencyCapacitance 76 pF/mRelative velocity of propagation 88Ü breakdown voltage 6000 VAttenuation & PowerFrequency Attenuation dB/100Mtr Power Rating(KW)100 MHz 1.24 6.3450 MHz 2.76 2.83900 MHz 4.05 1.921800 MHz 6 1.292200 MHz 6.75 1.172500 MHz 7.27 1.082700 MHz 7.6 1.04Materialcopper tubefoamed PECorrugated aluminium tubeBlack PEPeak Power Rating 90 KW5 GHz

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

• Characteristic Impedance: 50 ohms

• Color: Blue

• Jacket Material: Fluoropolymer (FEP)

• Overall Diameter: 7.00 mm

• Flexibility: Suited for flexible installations

• Inner Conductor:

  • Material: Silver-Plated Copper

  • Diameter: 1.63 mm

• Dielectric:

  • Material: Solid Extruded PTFE

  • Diameter: 5.27 mm

• Outer Conductor:

  • Type: Tin-soaked, Tin-Plated Copper Braid

  • Diameter: 6.20 mm

BT-3002 Cable

Coaxial Cable

Impedance - 75ohm

Colour - Black

Inner Conductor- Bare Copper - 0.31mm

Dielectric- Solid PE - 1.95mm

Outer Shield - Double Tiined Copper Wire -

85%(16/5/0.1)

Jacket - PVC - 3.5mm

• Characteristic Impedance: 50 Ω

• Application Frequency Range: Typically up to 6 GHz (depending on quality and connectorization)

• Attenuation: Not specified; commonly ~10–15 dB/100m at 900 MHz for 1/4" LDF-type cables

• Cable Type: Flexible Low Density Foam (LDF) Coaxial Cable

• Color: Black

• Inner Conductor: Copper-clad Aluminum (CCA) – Ø 2.70 mm

• Dielectric Material: Foamed Polyethylene – Ø 6.45 mm

• Outer Conductor: Annularly Corrugated Copper Tube – Ø 7.90 mm

• Outer Jacket: Black Polyethylene (non-specified flame retardancy) – Ø 8.82 mm

• Typical Temperature Range: -40°C to +85°C

• Minimum Bend Radius: Approx. 5× OD (≈ 44 mm typical)

• Ideal for:

  • Short-distance RF transmission lines

  • Jumpers for wireless base stations

  • Compact feeder line applications

• Use Case Environments:

  • Outdoor and indoor installations

  • Areas with moderate bending requirements and limited space

• Compact Size: 1/4" format allows for easy routing in space-constrained environments

• Good Electrical Performance: 50 ohm impedance and foamed dielectric for reduced signal loss

• Durable Construction: Corrugated copper outer provides flexibility with mechanical protection

• Lightweight Core: CCA conductor offers reduced weight without major performance compromise

• Versatile Compatibility: Supports a wide range of RF connectors and adapter assemblies

• Impedance: 50 ohms

• Cable Colour: Black

• Outer Diameter: 4.95 mm

• Jacket Material: Black Polyethylene (PE)

• Dielectric: Foamed Polyethylene (FPE)

  • Diameter: 2.95 mm

• Inner Conductor: Solid Bare Copper

  • Diameter: 1.12 mm

• Inner Shield: Unsealed APA (Aluminium-Polyester-Aluminium) Tape

  • Diameter over dielectric: 3.12 mm

• Outer Shield: Tinned Copper Braid

  • Gauge: 36 AWG

  • Coverage: 90%

  • Diameter over shield: 3.65 mm

• Ideal for high-performance RF communication systems, including wireless networks (WLAN), antennas, satellite, GPS, and microwave systems.

• Rugged enough for outdoor and industrial applications, with enhanced signal retention and physical durability.

• Higher power handling due to larger conductor size

• Excellent shielding with APA tape and 90% copper braid

• Low signal loss over longer distances

• Strong UV- and weather-resistant jacket for outdoor durability

• Electrically and dimensionally comparable to LMR-200 cable

• Impedance: 50 ohms

• Cable Colour: Black

• Outer Diameter: 6.10 mm

• Jacket Material: Black Polyethylene (PE)

• Dielectric: Foamed Polyethylene (FPE)

  • Diameter: 3.81 mm

• Inner Conductor: Solid Bare Copper

  • Diameter: 1.42 mm

• Inner Shield: Unsealed APA (Aluminium-Polyester-Aluminium) Tape

  • Diameter over dielectric: 3.99 mm

• Outer Shield: Tinned Copper Braid

  • Gauge: 36 AWG

  • Coverage: 90%

  • Diameter over shield: 4.51 mm

• Suited for demanding RF applications such as base station feeds, cellular repeaters, long antenna runs, and high-power transmission lines.

• Designed for both indoor and outdoor environments with excellent mechanical protection.

• Large conductor diameter enables low attenuation and high power handling

• Strong double shielding (APA + 90% braid) for excellent EMI suppression

• UV- and weather-resistant jacket ideal for outdoor use

• Electrically equivalent to LMR-240, offering high performance in a durable form factor

• Impedance: 50 ohms

• Cable Colour: Black

• Outer Diameter: 7.62 mm

• Jacket Material: Black Polyethylene (PE)

• Dielectric: Foamed Polyethylene (FPE)

  • Diameter: 4.83 mm

• Inner Conductor: Solid Copper-Clad Aluminium (CCA)

  • Diameter: 1.78 mm

• Inner Shield: Unsealed APA (Aluminium-Polyester-Aluminium) Tape

  • Diameter over dielectric: 4.98 mm

• Outer Shield: Copper-Clad Aluminium Braid

  • Diameter over shield: 5.72 mm

• Economical choice for medium- to long-distance RF applications where high power and low loss are needed but cost is a consideration.

• Suitable for base station cabling, repeater systems, and outdoor installations where moderate flexibility and environmental resistance are required.

• Large diameter and foamed dielectric provide low attenuation and good signal integrity

• Lightweight and cost-effective with CCA conductor and braid

• Double shielding with APA tape for moderate EMI protection

• UV-resistant PE jacket for reliable outdoor performance

• Comparable in size to LMR-300 but more budget-friendly due to CCA construction

• Impedance: 50 Ohm

• Conductor Type: Solid Copper-Clad Aluminium (CCA)

• Colour: Black

• Outer Diameter: 10.29 mm

• Jacket Material: Black Polyethylene (PE)

• Dielectric: Foamed Polyethylene (Foamed PE) – 7.24 mm

• Inner Shield: Sealed APA (Aluminium-Polyester-Aluminium) Tape – 7.42 mm

• Outer Shield: 34 AWG Aluminium Braid (90% coverage) – 8.12 mm

• Inner Conductor Diameter: 2.77 mm

• Frequency Range: Typically used for up to 6 GHz (dependent on manufacturer)

• Applications:

  • Antenna feeds

  • Wireless communication systems

  • CCTV and RF signal transmission

  • GPS and cellular systems

• Environment: Suitable for outdoor and indoor use (UV resistant jacket)

• High shielding effectiveness with dual-layer shielding (APA tape + 90% braid)

• Lightweight and cost-effective due to CCA conductor

• Low-loss RF performance similar to LMR-400 equivalents

• Robust PE jacket for outdoor durability

Coaxial CableImpedance - 50ohmColour - BlackInner Conductor-Bare Copper - 7/0.752Dielectric- Solid Polyethylene - 7.24mmOuter Shield - Double Copper wire barding- 93%+90%Jacket - PVC Black - 10.8mm

Suco Flex CableImpedance - 50ohmColour - BlueInner Conductor-Silver Plated Copper -0.56mmDielectric-Solid Extruded PTFE - 1.70mmOuter Conductor-Tin-Soaked tin plated copper-2.20mmJacket-Fluoropolymer Jacket FPI 205- 2.6mm

Suco Flex CableImpedance - 50ohmColour - BlueInner Conductor-Silver Plated Copper -0.95mmDielectric-Solid Extruded PTFE - 2.95mmOuter Conductor-Tin-Soaked tin plated copper-3.58mmJacket-Fluoropolymer Jacket FEP - 4.95mm

Rg217
Frequency - 1Ghz
Impedance - 50ohm
Elongation of PVC - 150 (min)%
Tensile stength of PVC - 12.5 (min)N/Sqmm
Condector Resistance at 200C - < 33.48 Ω/KM
Capacitance - 55 ± 5Pf/m
Shrinkage Test - 4% MAx
High Voltage Test - Should withstands with 3Kv (rms) voltage