Synergy Telecom Private Limited

RF Cables: -LMR 100, LMR 200, LMR 240, LMR 300, LMR 400, RG 6, RG 11, RG 58 , RG 59, RG 142, RG 174 RG 178, RG 179 , RG188, RG 213, RG 214, RG 217, RG 223, RG8, RG 316 (D/S, S/S), RG 400, 1.13mm,  Suco 141, Suco 0.86, RG 402, RG 405, SS 402, SS 405, LL 120, LL 142 , LL 335, 1/2'''', 7/8'''', 1-1/4'''', 1-3/8'''', 1-5/8'''' , LEAKY radiating type etc.

RG and lmr cable assembly

 
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 

SMB Female Right Angle to SMB Female Fight Angle RG316 Cable, we are offering this SMB female right angle to SMB female right angle rg316 cable in best price.
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:
Resistant to corrosion
Perfect finish
Long lasting life 

An N female bulkhead to u.FL cable assembly is a type of RF (radio frequency) coaxial cable assembly used to connect devices with different types of RF connectors. This assembly typically includes:

1. N Female Bulkhead Connector: A type of RF connector that is robust, has a threaded coupling mechanism, and is used for applications that require a secure connection. The bulkhead version is designed to be mounted through a panel or enclosure.

2. u.FL Connector: A micro-coaxial RF connector that is very small and used for high-frequency signals in applications where space is limited, such as in mobile devices, laptops, and wireless modules.

3. Coaxial Cable: The cable itself which transmits the RF signal. Common types for this assembly might include RG178, RG316, or other flexible, low-loss cables.

The N Female 4-Hole RG-141 SUCO connector is designed for use with RG-141 coaxial cables. It features an N-type female connection with four mounting holes for a secure and reliable installation. This connector is commonly used in high-frequency RF applications, including telecommunications, base stations, and RF systems that require stable, low-loss signal transmission.

It is constructed from nickel-plated brass for corrosion resistance, with a gold-plated center conductor to ensure excellent electrical conductivity. The PTFE insulator provides high dielectric strength, making it suitable for outdoor and challenging environments.

• Characteristic Impedance: 50 Ω

• Application Frequency Range: Typically up to 6 GHz (depending on connector and assembly quality)

• Overall Cable Diameter: 1.13 mm

• Color: Gray

• Inner Conductor: Silver-plated wire, 0.22 mm diameter

• Dielectric Material: FEP (Fluorinated Ethylene Propylene), 0.70 mm diameter

• Shielding: Tinned copper wire braid (16 groups of 4 strands, each strand 0.050 mm)

• Outer Jacket: FEP, final diameter 1.13 mm

• Typical Temperature Range: -40°C to +85°C (standard for FEP jackets)

• Ideal for:

  • Internal RF signal routing in compact devices (e.g., laptops, drones, routers, IoT modules)

  • U.FL / IPEX MHF connector assemblies

• Use Case Environments:

  • Low-profile, space-constrained enclosures

  • High-frequency, low-loss signal transmission

• Ultra-thin Profile: 1.13 mm diameter for space-saving installations

• High Signal Integrity: 50 ohm impedance for RF compatibility

• Flexible Construction: Facilitates bending and routing in tight enclosures

• Durable Jacket & Shielding: FEP material for chemical resistance and thermal stability, with tinned copper shielding for effective EMI protection

• Impedance: 50 ohms – ideal for RF systems

• Inner Conductor: Solid silver-plated copper-clad steel

• Dielectric: PTFE (Polytetrafluoroethylene) – excellent insulation and high-temp resistance

• Shielding: Dual silver-plated copper braids – superior EMI/RFI protection

• Outer Jacket: FEP (Fluorinated Ethylene Propylene) – flame-retardant, chemical-resistant, and flexible

• Outer Diameter: Approx. 4.95 mm (0.195 inches)

• Operating Temperature: -65°C to +200°C

• Frequency Range: DC to 6 GHz

• Characteristic Impedance: 50 Ω

• Application Frequency Range: Typically up to 6 GHz (depends on cable construction and quality)

• Attenuation: Not specified; typically ~4–6 dB/100m at 900 MHz for 1/2" LDF cables

• Cable Type: Flexible Low Density Foam (LDF) Coaxial Cable

• Color: Black

• Inner Conductor: Copper-clad Aluminum (CCA) Wire – Ø 4.80 mm

• Dielectric Material: Foamed Polyethylene – Ø 12.50 mm

• Outer Conductor: Annularly Corrugated Copper Tube – Ø 13.80 mm

• Outer Jacket: Black Low Smoke Halogen-Free (LSZH) Flame Retardant Polyolefin – Ø 15.80 mm

• Typical Temperature Range: -40°C to +85°C

• Ideal for:

  • RF transmission lines in wireless infrastructure (e.g., cell towers, repeaters)

  • Indoor and outdoor base station feeders

  • DAS (Distributed Antenna Systems)

• Use Case Environments:

  • Environments requiring low smoke and halogen-free materials (e.g., public buildings, tunnels)

  • Moderate flexibility for easier installation

• Reliable Performance: 50 ohm impedance optimized for RF applications

• Low Attenuation: Foamed dielectric and solid conductor minimize signal loss over distance

• Fire Safety: LSZH jacket provides flame retardance and reduces toxic emissions in fire conditions

• Mechanical Durability: Corrugated copper outer conductor offers flexibility and structural strength

• Versatile Use: Suitable for both indoor and outdoor installations with proper weatherproofing

Ufl Coaxial connector assembly.U.FL (I-PEX) Cable Assembly – Short Specifications

Connector Type: U.FL / I-PEX (Micro RF connector)

Impedance: 50 Ω

Frequency Range: DC to 6 GHz (up to 9 GHz for some variants)

Cable Types:

RG-178 (Ø ~1.8 mm)

RG-316 (Ø ~2.5 mm)

1.13 mm micro-coax (most common)

Insertion Loss: Low loss, cable-dependent

VSWR: ≤ 1.3 : 1 (typical)

Mating Cycles: ~30 cycles

Operating Temperature: −40°C to +85°C (typical)

Connector Plating: Gold-plated contacts

Cable Lengths: Custom (50 mm to 3000 mm or more)

Termination Options:

U.FL to U.FL

U.FL to SMA / RP-SMA / MMCX / IPEX

Mounting Type: Snap-on, surface mount on PCB

Applications

Wi-Fi, Bluetooth, GPS, LTE, IoT modules

RF modules, embedded antennas

Compact electronic devices

If you want, I can also provide U.FL to SMA cable specs, price in India, or a datasheet-style format for quotation or customer sharing

N male to SMA bulkhead rg 316 cable, we are offering N male to SMA bulkhead rg 316 cable in best price.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:

Resistant to corrosion

Perfect finish

Long lasting life 

Material Diameter ( inch ) Diameter ( mm )Center Conductor Bare Copper 0.0900 inch 2.29 mmDielectric Foamed Polyethylene 0.285 inch 7.24 mmOuter Shield Copper Braid 0.314 inch 7.98 mmJacket Black PVC 0.405 inch 10.29 mm

Iot rfid 5g and 6g smart city ai application

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RG-213 is a type of coaxial cable commonly used for radio frequency (RF) transmissions, especially in amateur radio, VHF/UHF communications, and high-power signal applications. It features a solid copper core, a polyethylene dielectric, and a braided copper shield, offering low signal loss and excellent shielding against electromagnetic interference (EMI). With a characteristic impedance of 50 ohms and a typical outer diameter of about 10.3 mm, RG-213 is known for its durability, making it suitable for both indoor and outdoor use in demanding environments.

N male to sma male cable assembly
1. Frequency range:- Hig
2. Impedance:- 50ohms.
3. Low insertion loss.
4. Best VSWR
5. Best quality.
6. Best price.

Physical Characteristics Specification               mm                 inchInner Conductor         0.90             0.035Insulation   2.95             0.116Inner Shield               3.45             0.136Outer Shield               3.95             0.156Armor                        5.30             0.209Weight     0.056kg/mMin Bending Radius dynamic                25.4mmDurability                      5000Working Temp.         -45 80 Electrical CharacteristicsVSWR Max 1GHz 3GHz 6GHzSMA 1.10:1 1.15:1 1.25:1N 1.10:1 1.15:1 1.25:1BNC 1.15:1 1.25:1Impedance 50 ohmsVelocity   66%Screening Effectiveness  80 dBCapacitance 30.8pf/ft=101pf/mBending Amplitude Stability ≤±0.05dB@6GHzBending Phase Stability ±2°@6GHz Attenuation(25???)Frequency (MHz) dB/100ft dB/100m 100  3.99 13.1 400 8.20  26.9 1000 13.41  44.0 3000 24.81  81.4 5000 33.50 109.9 6000 41.51 136.2 Power handling@25???&Sea Level(cable only) Frequency (MHz) Watts 100 140 400 86 1000 52 3000 20 5000 17 6000 15

• Resistant to corrosion
• Perfect finish
• Long lasting life 

Physical CharacteristicsArmor Outer Dia. 5.80 mm 0.228 inch Durability  5000Weight 0.042kg/m Working Temp. -55 125 Min Bending Radius  36.0mmArmor Stress Tolerance  100N/25mm
Dielectric Withstand Voltage   500V DC
Velocity 76% Electrical CharacteristicsVSWR MaxConnector 18GHz 26.5GHz 40GHz 50GHz2.92mm 1.25:1 1.30:1 1.30 -- 2.4mm 1.25:1 1.30:1 1.30 1.35ScreeningEffectiveness  90 dBImpedance  50 ohms Phase stable ±0.05dB@50GHzCapacitance 27pf/ft=88pf/m
Bending Phase ≤±5°@50GHzAttenuation and Power handling@25 and Sea LevelAttenuation (25 Power handling@25 Sea LevelFrequency(MHz) dB/100ft dB/100m Watts300 13.4 23.9 580500 23.3 30.9 4201000 33.2 43.8 2503000 43.1 76.4 1406000 48.2 108.8 13012000 58.5 158.1 8018000 71.6 191.8 7226500 88.9 234.8 6640000 13.4 291.7 6050000 23.3 328.5 56