Synergy Telecom Private Limited

BNC female to N female adapter1. Frequency range:- Up to 3GHz2. Impedance:-50ohms3. Insertion loss:- Low4. VSWR:- Best.5. Good quality.6. For more details contact with us we have all types of adapters.

A DIN Male to N Male RF adapter is a coaxial connector that converts between DIN (Deutsches Institut für Normung) and N-type RF interfaces, both in male configurations. These adapters are commonly used in telecom, broadcast, and high-frequency test systems where different RF connector types need to be interconnected.

• DIN Male (Plug): Threaded coupling (7/16 DIN, 4.3-10 DIN, or 1.0/2.3 DIN).

• N Male (Plug): Standard 5/8"-24 threaded RF connector.

• Impedance: 50Ω (matched for RF applications).

• Frequency Range: Up to 7.5 GHz (7/16 DIN) or 10 GHz (4.3-10 DIN).

• Materials: Brass/stainless steel body, gold-plated contacts.

• Applications: Cell towers, military comms, lab equipment, and antenna systems.

•  

N Male to BNC male adapter
1. Frequency range:- Up to 3GHz.
2. Impedance:- 50ohms.
3. Insertion loss:- Low
4. VSWR:- Best.
5. Good quality.
6. Quick delivery.
7. For more details contact with us we have all types of adapters.
INDIAN  manufacturer of Antennae, Cable assemblies, Microwave Components, IOT and M2M learning,DAS/ IBS and BTS installation materials, Solar passive components Synergy is Indian Antenna and RF Co-axial Cable assembly manufacturer. We deal in rf connector, rf Co-axial Cable, all types of antenna, antenna cables, jumper cables, microwave components, Attenuator, dummy loads, dc block, splitter, Duplexer, Couplers, Combiners, low pim test cables, tools, Ibs n DAS product, GPRS, rfid product''s, Iot products, and 5g products for smart city,, pls confirm if any enquiry across..

N Male to UHF Female adaptor, we are offering this N Male to UHF Female adaptor in best price

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as alsoHigh Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as alsoHigh Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female includingHigh Frequency adaptors 2.4/2.92/3.5mm etc.

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including PrecisionHigh frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS 

RF Cable, RF Cable Assemblies,

RF Connectors, RF Passive

MW components,

WAVEGUIDES  Installation Material.

RADIATING CABLE 

Co-axial Cables 

LEAKY CABLE

RF CABLE

Antenna

RF Components

Co-Axial Connectors

RF CONNECTOR

coaxial jumper cable

RF Adapters

HIGH FREQ TEST CABLES

COAXIAL ADEPTER

BTS and IBS installation material

Feeder Clamp,

Earthing kit,

Weather proofing kits

Calibration kit,

GPS

TOOLS

TEST EQUIP

#ipx cable

#ufl cable

#test cable

#antenna cable

#feeder cable

#if cable

#signal cable

#utp cable,

#stp cable

#lan cable

#wan cable

#internet cable

#INTERNAL CABLE.

#INTERFACE CABLE.

#TX CABLE

#RX CABLE

#Antenna

#RF Connector

#Coaxial Cable Assembly

#TNC Connector

#RF Adaptor

#SMA Connector

#RF Cable

#RF Adapters inseries sma tnc din

#DIN Connector

#SMB Connector •

#Telecom Cables • #RF COAXIAL Connectors •

#Antenna IOT • #BNC Connector • #N Connector •

Microwave Components INSTALLATION

SFP Optical Transceiver

Telecom Tools

Feeder Clamp RF CABLE

Cable Management Tools

Rj-45 Connector • Balun bnc smz rj45 50 75 120 600

Solar PRODUCT Installation Material

Gps Antenna •

Omni Antenna •

Rubber ANTENNA

#ipx cable

#ufl cable

#test cable

#antenna cable

#feeder cable

#if cable

#signal cable

#utp cable,

#stp cable

#lan cable

#wan cable

#internet cable

#INTERNAL CABLE.

#INTERFACE CABLE.

#TX CABLE

#RX CABLE

#Antenna

#RF Connector

#Coaxial Cable Assembly

#TNC Connector

#RF Adaptor

#SMA Connector

#RF Cable

RF Connectors:

N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF,

RCA  

High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N

SMA/

DIN/

APC7

RF Cables: HLF 100/200/400/240/300/400

RG 6/11/58/59/142/174/178/179/188/213/214/217/223/316/400

1.13 mm RF CABLE 

High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female 

High Frequency adaptors 2.4/2.92/3.5mm etc.

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers

Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

Microwave Products

Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers,

The 50 Watt N Male Dummy Load (DC-3GHz) by Synergy is a high-performance RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and N-type male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 50 Watts, it is ideal for indoor RF setups and network optimization.

The 200 Watt N Male Dummy Load (DC-3GHz) by Synergy is a high-power RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and N-type male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 200 Watts, it is ideal for indoor RF setups and network optimization. 

The 2W DIN M Dummy Load (DC-3GHz) by Synergy is a compact RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and DIN male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 2 Watts, it is ideal for indoor RF setups and network optimization. 

RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.

The 0–4 GHz 100 W Dummy Load / Termination Load is a high-performance RF termination device designed to safely absorb RF power and prevent signal reflections in wideband communication systems. It provides a stable 50-ohm impedance across the entire operating frequency range, ensuring excellent matching and minimal VSWR.

This dummy load is commonly used in RF testing, DAS systems, base stations, power amplifier testing, and antenna port termination, where unused RF ports must be properly terminated to maintain system stability and performance.

 Connector Role

• The N Female interface provides a secure, threaded connection with excellent shielding and low signal loss.
• It’s commonly used on RF power splitters, which divide one input signal into 2, 3, or 4 outputs—each with equal power and phase balance.

⚙️ Typical Specs

• Impedance: 50 ohms
• Frequency Range: 700 MHz to 6 GHz (depending on the splitter model)
• VSWR: ≤ 1.2 for minimal reflection
• Power Handling: Up to 200W in cavity-style splitters

🛠️ Applications

• 4G/5G base stations
• Wi-Fi and public safety networks
• RF test benches and monitoring systems

For example, the 3-Way N Female Cavity Splitter from Synergy Telecom handles 200W across 800–2500 MHz and is built for rugged outdoor use. It’s ideal for distributing signals to multiple antennas while maintaining signal integrity.

Here’s a detailed description of a 5W DIN Female Dummy Load (DC–3 GHz):

This RF dummy load is designed to safely absorb radio frequency energy without radiating it, making it ideal for testing and terminating RF systems. It features a DIN female connector, known for its robust threaded design and excellent performance in high-frequency applications. The load is rated for 5 watts of continuous power and operates effectively from DC up to 3 GHz, maintaining a 50-ohm impedance for proper signal matching.

The body is typically constructed from aluminum or stainless steel, often with a nickel or gold-plated finish to ensure corrosion resistance and optimal conductivity. It offers a low VSWR (≤1.2:1), ensuring minimal signal reflection and efficient energy absorption. Compact and lightweight, it’s commonly used in telecom, radar, satellite, and RF lab environments for equipment calibration, signal termination, and system diagnostics.

The 1W BNC Male Dummy Load (10GHz) by Synergy is a compact RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 10 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and BNC male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 1 Watt, it is ideal for high-frequency RF setups and network optimization. 

The 2 W F Male Dummy Load (3 GHz) is an RF termination device designed for low-power applications. It operates efficiently up to 3 GHz with a 50-ohm impedance, ensuring minimal signal reflection (VSWR <1.3:1). Featuring an F Male connector, it integrates securely into RF systems, making it ideal for testing, calibration, and signal termination. Constructed from brass or aluminum, it offers durability and effective heat dissipation. Commonly used in communication systems, laboratory environments, and microwave applications, this dummy load ensures stable performance while preventing unwanted RF emissions.

• RoHS Compliance

Product Specification:-

• Material Type : Body: Brass , Insulator: Teflon/Darling , Center Conductor: Brass/PB/BC , Coupling Nut: Brass
• Brand Name : RF Connector House
• Pkg Qty : 1
• Temperature : (-)10 C - (+)55 C
• Specifications : VSWR: .2,Dielectric withstanding Voltage: >2500V RMS, 50Hz, At sea Level
• Finish Type : Nickel , Gold/Nickel
• Input Impedance : 50 ohm
• Frequency Range : DC-3 GHz

SMA male to 1.0mm female adapter is one of the many RF components that ship same day as they are ordered. male SMA to female 1.0mm adapter has a straight body. This  straight SMA coax adapter is a in-line RF adapter.

DIN Female to N Male RF adapter:

1. Connector Types:

   • DIN Female: Threaded RF connector (typically 7/16 DIN or 4.3-10 DIN)

   • N Male: Standard 5/8"-24 threaded RF connector

2. Electrical Characteristics:

   • Impedance: 50Ω (standard for RF applications)

   • Frequency Range:

     • 7/16 DIN: 0-7.5 GHz

     • 4.3-10 DIN: 0-10 GHz

   • VSWR: Typically <1.25:1

3. Mechanical Specifications:

   • Body Material: Brass or stainless steel

   • Plating: Silver or gold over nickel

   • Coupling Torque: 1.5-2.5 Nm for DIN side

   • Operating Temperature: -55°C to +125°C

4. Performance Features:

   • Excellent RF shielding

   • Low insertion loss (<0.1 dB typical)

   • High power handling (up to 500W average for 7/16 DIN)

   • Weatherproof (IP67 rated versions available)

• Cellular base station installations

• Microwave radio links

• Antenna systems

• Test and measurement equipment interfaces

•  

N Female to F Male Adapter

A N Female to F Male adapter is a coaxial RF connector used to bridge N-type and F-type cable interfaces.

• Connectors:

  • N Female (Jack): 5/8"-24 threaded (50Ω, high-frequency)

  • F Male (Plug): 3/8"-32 threaded (75Ω, common for cable TV/satellite)

• Impedance: Typically 75Ω (optimized for video/RF signals)

• Frequency Range: Up to 1 GHz (limited by F-type’s design)

• Material: Brass body, nickel or gold plating

•  

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including PrecisionHigh frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS 

1.85mm male to 1.85mm female adapter is one of the many RF components that ship same day as they are ordered.  male 1.85mm to female 1.85mm adapter has a right angle body. This  right angle 1.85mm coax adapter is a 90 degree right angle RF elbow adapter.

Our male 1.85mm t

Electrical Specification Characteristic Impedance 50 ohm Frequency Range DC- 3 GHz VSWR 2500V RMS, 50Hz, At sea Level Dielectric Resistance > 5000 M  RoHS Compliance Material Specification Material Plating Body Brass Nickel Insulator Teflon/Darling - Center Conductor Gold/Nickel Coupling Nut Brass Environmental Temperature Range - 10°C – 55 °C

The term "4.3-10 male connector to N female adapter" refers to a specific type of RF (Radio Frequency) adapter used in telecommunications and networking equipment. Here's a breakdown of the components and their meaning:

• The 4.3-10 connector is a small, high-performance coaxial connector designed for use in modern RF systems, typically in the frequency range of up to 6 GHz or higher. It is commonly used in applications such as wireless communication, base stations, and other telecommunication infrastructure.
• The male part of the connector means that it has a protruding pin that will connect to the female counterpart of the same connector type or an adapter.
• The 4.3-10 series was developed to improve upon previous designs like the 7/16 connectors, offering a smaller form factor with better performance, especially in terms of reduced loss and higher power handling.

• The N connector is a type of RF connector used for connecting coaxial cables, typically in the range of 0-11 GHz. The female version of this connector has an internal socket that accepts the male pin of an N-male connector.
• The N connector is commonly used in telecommunications, broadcasting, and networking applications, often in systems that involve antennas, cable runs, or other RF equipment.

• An adapter in this context is a passive device that allows the connection between two components that would otherwise not directly fit together. In this case, the adapter has a 4.3-10 male connector on one side and an N female connector on the other side. This enables equipment with different types of connectors to interface with each other.
• The adapter is typically used to match different sizes, types, or series of connectors between cables, antennas, or other RF components.

• Frequency Range Compatibility: The adapter allows seamless operation between devices using the 4.3-10 and N connector series, ensuring proper signal transmission and minimizing signal loss.

HI, We are one of the growing company in the field of manufacturing of all types of antenna, antenna cables, jumper cables, TEST CABLES, IBS and BTS installation material, MW COMP, Att, Dummy loads, Dc block, splitter, Duplexer, Couplers, Combiners, RF connector, RF Co-axial Cable, Low PIM test cables, TELECOM tools, GPRS, RFID product's, Iot products, and 5g products for smart city,,

pls confirm if any enq across..

Pls confirm whether we can do some business together in near future.. Pls stay at home and be safe yr self and yr family

We also keep the stock of all kind of RF connectors, RF Cables , rf cable assemblies and microwave componentsi

RF Cables: -LMR 100, LMR 200, LMR 240, LMR 300, LMR 400, RG 6, RG 11, RG 58 , RG 59, RG 142, RG 174 RG 178, RG 179 , RG188, RG 213, RG 214, RG 217, RG 223, RG8, RG 316 (D/S, S/S), RG 400, 1.13mm,  Suco 141, Suco 0.86, RG 402, RG 405, SS 402, SS 405, LL 120, LL 142 , LL 335, 1/2', 7/8', 1-1/4', 1-3/8', 1-5/8' , LEAKY radiating type etc.

http:

A N Female to Male T-adapter is a heavy-duty 3-port RF splitter/combiner designed to connect one N-type female port to two N-type female cables via a central male connector.

• Port Configuration:

  • 1x N Male (Center): Main input/output (5/8"-24 thread)

  • 2x N Female (Side Ports): For signal splitting/combining

• Impedance: 50Ω (standard for RF applications)

• Frequency Range: DC to 11 GHz (high-performance models)

• Power Handling: Up to 500W average (7/16 DIN versions available for higher power)

• Material: Nickel-plated brass, stainless steel options