Synergy Telecom Private Limited

Electrical: Characteristic Impedance 50 ohm Frequency Range DC-6 Ghz VSWR ≤1.15@DC-3GHz Dielectric Withstanding Voltage ≥1000V RMS,50Hz,at sea level Dielectric Resistance ≥5000MΩ Contact Resistance Center Contact ≤1mΩ Outer Contact ≤0.25mΩ ________________________________________________________________________________ Mechanical: Durability Mating Cycles ≥500 ________________________________________________________________________________ Material and Plating: Material Plating Body Brass Ni Insulator PTFE(Teflon) － Center conductor Brass Au ________________________________________________________________________________ Environmental: Operating Temperature Range -40℃～+85℃ RoHs Compliant

The L6050 Series typically refers to a specific product line or family of components, often used in industries such as electronics, connectivity, or mechanical systems. However, without further context, it is difficult to pin down exactly what type of product this refers to, as the L6050 Series could be associated with various components like connectors, capacitors, resistors, inductors, motors, or other equipment.

• Type: TNC Female (TNC(F)) connector with Front Nut (FN) & Bulkhead (B/H) mounting.

• Design: Reducing type – adapts larger connector interface to smaller LMR-100 cable (3.2mm OD).

• Termination: Typically crimp or solder (verify model-specific details).

• Key Features:

  • 50Ω impedance, maintains signal integrity for RF applications.

  • Bulkhead (B/H) mount with front nut (FN) for secure panel/box installation.

  • Strain relief for thin, flexible cables.

• Applications:

  • Compact wireless systems, GPS, UAVs, and test equipment.

  • Used where space optimization and cable downsizing are critical.

• Type: TNC Female (TNC(F))

• Style: Crimp termination

• Cable: RG-59 (75Ω, 6.15mm/0.242" OD)

• Impedance: 75Ω

• Precision crimp for secure center conductor and shield contact

• Nickel-plated brass body for corrosion resistance

• Frequency range: DC to 1GHz (optimal performance)

• VSWR: <1.5:1 typical

• Requires RG-59 crimp tool

• Strip length: ~8-10mm (verify exact spec)

• Center conductor protrusion: 1-2mm

• Crimp sequence: center pin first, then outer conductor

• Insertion loss: <0.5dB @ 500MHz

• Mating cycles: 300+

• Operating temp: -40°C to +85°C

• CCTV video systems

• RF modulators

• Broadcast video links

• 75Ω test equipment

Note:

• Not compatible with 50Ω systems without impedance matching

• For outdoor use, apply weatherproofing sealant

• Connector Type: TNC Female (TNC(F))

• Cable Compatibility:

  • RG316 (High-flex, 50Ω, 2.55mm OD)

  • RG174 (Flexible, 50Ω, 2.79mm OD)

  • RG179 (Low-loss video, 50Ω, 2.8mm OD)

  • LMR-100 (Ultra-flexible, 50Ω, 3.2mm OD)

• Termination: Crimp-style for fast, tool-assisted installation (no soldering needed).

• Key Features:

  • 50Ω impedance (0-6 GHz typical performance)

  • Precision crimp design for reliable shield and center conductor retention

  • Nickel-plated brass body for durability and corrosion resistance

• Applications:

  • Portable RF devices (GPS, radios, IoT)

  • Test equipment (spectrum analyzers, signal generators)

  • Aerospace & UAV systems (lightweight cabling solutions)

Installation Note:

• Requires RG316/174/179/LMR-100 specific crimp tool

• Proper strain relief recommended for flexible cables

A DB25 connector is an established parallel port connection in computers often referred to as a printer port. These 25-pin d-subs offer rugged connections of peripherals and have excellent shock and vibration resistance. Vertical or right-angle orientations combined with various mounting options make these d-subs and excellent choice in industrial applications.

15PIN DB CONNECTOR
Antenna connector splitter cable duplex dummy lord coupler dc block

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS 

Synergy Telecom Pvt Ltd presents Nokia Connector
Part no. :WZF02P0020LN02
Quality check: Yes

1. Core Specifications

• Type: TNC Male Right-Angle (50Ω)

• Cable: LMR-240 (6.1mm/0.240" OD)

• Frequency: 0-6 GHz

• VSWR: <1.25:1

• Impedance: 50Ω ±1Ω

2. Mechanical Design

• 90° Right-Angle body (saves 65% space vs straight connectors)

• Clamp Mechanism:

  • Dual compression zones (shield + jacket)

  • Tool-actuated radial compression

• Materials:

  • Body: Nickel-plated brass

  • Contact: Beryllium copper

  • Seal: Fluorosilicone O-ring (IP67)

3. Installation Data

• Strip Length: 10.2mm ±0.2mm

• Center Conductor: 2.8mm protrusion

• Torque Values:

  • Connector mating: 12 in-lbs

  • Clamp compression: 35-40 lb-in

• Tool Compatibility:

  • Times Microwave CT-240

  • Jonard Tools WC-2400

4. Performance Metrics

• Insertion Loss:

  • 0.18 dB @ 2 GHz

  • 0.35 dB @ 6 GHz

• Power Handling:

  • 300W @ 2 GHz

  • 150W @ 6 GHz

• Durability:

  • 500+ mating cycles

  • 50N cable retention force

5. Environmental Ratings

• Temperature: -55°C to +125°C

• Humidity: 95% RH non-condensing

• Vibration: MIL-STD-810G, Method 514.7

6. Compliance

• MIL-STD-348B

• IEC 61169-17

• RoHS 3 (2015/863/EU)

Application Notes:

1. Ideal for 4G/5G small cell deployments

2. Recommended for UAV avionics bays

3. Preferred for rack-mounted test equipment

Installation Warning:

• Requires LMR-240 specific prep tool

• Over-compression may increase VSWR by 0.2:1

• Annual re-torque recommended in high-vibration environments

Tooling Part Numbers:

• Stripper: SCT-240 (Times Microwave)

• Compression Tool: WC-2400 (Jonard)

Available in:

• Standard nickel finish

• MIL-SPEC passivated version

• Custom length center contact options

SYNERGY TELECOM PVT LTD. The Flex Twist for WR120 18GHz is a flexible, twistable waveguide designed for high-frequency applications. It operates within the 12.4–18.0 GHz range and is built to accommodate misalignment issues while ensuring optimal signal transmission. The waveguide is constructed with durable materials, often featuring a neoprene or silicone jacket for protection. It provides low attenuation and high power handling, making it ideal for microwave communication systems. The Flex Twist design allows for easy bending and twisting, reducing installation difficulties and vibration effects. This component is widely used in radar, satellite, and wireless communication setups requiring reliable waveguide performance.

An HDMI cable is essential for connecting various audiovisual devices, delivering high-definition video and audio signals with minimal quality loss. Understanding the different types and specifications helps ensure you choose the right HDMI cable for your specific needs, whether for home entertainment systems, gaming setups, or professional environments.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

The BNC_F_FN_BH_RA_PCB_MOUNT_PB is a BNC female right-angle PCB mount connector, commonly used in RF applications. Here are its key specifications:

• Impedance: 50 ohm
• Frequency Range: DC to 3 GHz
• VSWR: <1.2
• Dielectric Withstanding Voltage: 2500V RMS, 50Hz, at sea level
• Dielectric Resistance: 5000 MΩ
• Material: Brass body with white bronze plating, Teflon/PTFE insulator, phosphor copper center conductor with gold plating
• Temperature Range: -10°C to +55°C
• Durability: Mating cycle ≥500

This connector is ideal for RF and telecommunications applications, offering high reliability and precision. If you're considering it for a project, ensure proper PCB layout and soldering techniques for optimal performance. 

The BNC_F_FN_BH_RA_PCB_MOUNT_PB is a BNC female right-angle PCB mount connector, commonly used in RF applications. Here are its key specifications:

• Impedance: 50 ohm
• Frequency Range: DC to 3 GHz
• VSWR: <1.2
• Dielectric Withstanding Voltage: 2500V RMS, 50Hz, at sea level
• Dielectric Resistance: 5000 MΩ
• Material: Brass body with white bronze plating, Teflon/PTFE insulator, phosphor copper center conductor with gold plating
• Temperature Range: -10°C to +55°C
• Durability: Mating cycle ≥500

This connector is ideal for RF and telecommunications applications, offering high reliability and precision. If you're considering it for a project, ensure proper PCB layout and soldering techniques for optimal performance.

The BNC(M) Right-Angle Crimp Connector for LMR-200 is a compact, high-performance RF connector designed for tight installations where space is limited. Here's a quick breakdown of its key features based on models from Synergy Telecom and others:

• Connector Type: BNC Male, Right-Angle (R/A)
• Cable Compatibility: LMR-200 and equivalent 5 mm coaxial cables
• Impedance: 50 Ohms – ideal for RF signal integrity
• Frequency Range: DC to 3–4 GHz depending on the model
• VSWR: Typically ≤1.15 (0–3 GHz) – ensures minimal signal reflection
• Termination: Crimp-style for both shield and center conductor
• Materials:
  • Body: Brass with nickel or gold plating
  • Center Contact: Silver or gold-plated brass
  • Insulator: PTFE (Teflon)
• Dielectric Strength: ≥2500V RMS
• Contact Resistance: Center ≤1.0 mΩ, Outer ≤0.25 mΩ
• Operating Temperature: –40°C to +85°C
• Applications: Telecom, broadcasting, RF test setups, and compact enclosures

This connector is a go-to for installations where cable routing needs a sharp bend without compromising signal quality. Want help comparing it to a straight version or need a crimping guide? I’ve got you.