Synergy Telecom Private Limited

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Rf connector high frequency Any new enquiry across 
Pasternack
 N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.
RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.

LMR-300 is a low-loss, flexible coaxial cable designed for RF and microwave signal transmission. It offers excellent performance in terms of attenuation, shielding, and flexibility, making it ideal for both indoor and outdoor use in wireless communications, antenna connections, GPS, and broadband systems.

You're looking at a waveguide-to-coax adapter—specifically, a WR-137 waveguide transitioning to an N-type female coaxial connector. These adapters are commonly used to bridge waveguide systems (often in radar, satellite, or microwave communications) with coaxial cable systems.

Here are a few key specs from popular models:

• Waveguide Size: WR-137 (supports frequencies roughly from 5.85 to 8.2 GHz)
• Connector Type: N Female (50 Ohm impedance)
• Design: Right-angle configuration
• Flange Standard: UDR70 or UG344/U depending on the manufacturer
• VSWR: Typically 1.25:1 or better

A WR112 to N Female adapter is a waveguide-to-coaxial transition component designed for X-band frequencies, typically operating from 6.57 to 9.99 GHz. It connects a WR112 waveguide to a Type-N female coaxial connector, enabling efficient signal transfer between waveguide and coaxial systems. These adapters usually feature a UBR84 flange and a right-angle configuration, with a VSWR of 1.20 to 1.25:1, ensuring minimal signal reflection and low insertion loss. Constructed from aluminum, they are lightweight and corrosion-resistant, making them ideal for radar, satellite communication, and RF testing environments

Synergy is Indian Antenna and RF Cable assembly mfr, deal in rf connector, rf Cable, all types of antenna cables, mw components, Attenuator, splitter, Duplexer, Couplers, Combiners, tools, Ibs n DAS product, GPRS, rfid, Iot , 5g products for smart city,

• Impedance: 50 Ohm

• Conductor Type: Solid Copper-Clad Aluminium (CCA)

• Colour: Black

• Outer Diameter: 10.29 mm

• Jacket Material: Black Polyethylene (PE)

• Dielectric: Foamed Polyethylene (Foamed PE) – 7.24 mm

• Inner Shield: Sealed APA (Aluminium-Polyester-Aluminium) Tape – 7.42 mm

• Outer Shield: 34 AWG, 90% Tinned Copper-Clad Aluminium (TCCA) Braid – 8.12 mm

• Inner Conductor Diameter: 2.77 mm

• Frequency Range: Typically effective up to 6 GHz (dependent on system design)

• Applications:

  • RF signal transmission

  • Base station antennas

  • WLAN/Wi-Fi, GPS, and 4G/5G systems

  • Surveillance and broadcast

• Environment: UV-resistant jacket for indoor/outdoor installation

• Enhanced corrosion resistance due to Tinned CCA outer braid (TCCA)

• Excellent shielding performance from dual-layer shielding (APA + 90% braid)

• Cost-effective solution with solid RF performance comparable to LMR-400 equivalents

• Suitable for both fixed and mobile RF applications

 SMA3.5 mm2.92 mm2.4 mm1.85 mm1 mm3.5 mm NMD 2.92mm NMD 2.4 mm NMD 1.85 mm NMD SSMA BMA SBMA MCXM MCX SMP SMP M Type  N TNC BNC SMB SSMB QMA SSMB QN MHF1 MHF2 MHF3 HFC TNC AN7123 MCX7 BNC7 RSMA RSSMA RNR TNCF KHX

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 
 

 Characteristic Impedance 50 ohm Frequency Range 0~3000Mhz Input VSWR ≤ 1.19 Output VSWR ≤ 1.29 Attenuation 3dB Attenuation Accuracy ≤ 1.0 dB IMD 三 -110 dBc Input Connector N male Output Connector N female RoHS Compliance 

LMR® is a low-loss coaxial cable series manufactured by Times Microwave Systems, designed for RF signal transmission with excellent shielding and flexibility, especially in wireless communications.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Rf cable assemblies
jumper cable assmbalies
ipx cable
ufl cable

test cable

antenna cable

feeder cable

if cable

signal cable

utp cable,

stp cable

TX CABLE

RX CABLE 

•             Antenna

•             RF Connector

•             Coaxial Cable Assembly

•             TNC Connector

•             RF Adaptor

•             SMA Connector

RF Cable

RF Adapters inseries sma tnc din

DIN Connector

•             SMB Connector

•             Telecom Cables

  RF COAXIAL Connectors
Antenna IOT

BNC Connector

N Connector

Microwave Components

SFP Optical Transceiver

Telecom Tools

•             RF Cables

•             Gsm Antenna

•             Feeder Clamp

•             Cable Management Tools

•             Rj-45 Connector

•             Balun bnc smz rj45 50 75 120 600

•             Solar PRODUCT Installation Material

Gps Antenna

Omni Antenna

Rubber Mastic Tape

•             rf Coupler

•             RF Surge Arrestors

•             GPS Accessories

 Crimping Tools telecom tools Pliers

L9 Connector

 Rf Coaxial Cable

Test & Measuring Instruments

RF Power Splitters

uy Connector DB9 DTYPE
smp rf connector

Signal Cable telephone cable 

smp rf connector

Signal Cable telephone cable

Vhf Antenna hf uhf

Distribution Box KRONE

lan stp Coaxial Wires

Gps Antennas

Base Station Antenna

Cctv Bnc Connectors

Dummy Load

wifi Radio ism

Antenna Connectors

leaky Feeder cable Clamp

4g Antennas 5g 

Gps gsm antenna lpda

Drop Wires

Mimo Antenna

RG Coaxial Cable

Antenna FOR Two Way Radio VHF

rf Coaxial Cables assemblies

Dipole Antenna

Antenna Feeder CABLE AND Accessories

FEEDER Jumper CABLE

emi shielding rf absorver material

RG Rf Coaxial Cables

Feeder Cable Clamps

• Gsm Magnetic Antenna

Cat 6 Ethernet Cable lan rj45

Optical Fiber Path Cord

Krone Module And Tool

Antenna vswr test

• Sma Adapter

Mobile Antenna

SUPPER Flex Cable

Gsm Ceiling Antenna

Rf Coaxial Cable Assembly

• Antenna Magnetic GSM

• Power Sensor

• RF Directional Couplers

1. Basic Specifications

• Connector Type: TNC Male (Standard 50Ω)

• Cable Compatibility: LMR-300 (8.0mm/0.315" OD)

• Termination Type: Crimp (dual-stage: center conductor + shield)

• Frequency Range: DC to 6 GHz

• VSWR: <1.25:1 (typical)

• Impedance: 50Ω ±1Ω

2. Key Features

• Hexagonal crimp pattern for 360° shield contact

• Nickel-plated brass body with corrosion resistance

• PE dielectric for stable RF performance

• Strain relief collar for cable retention

• Mating cycles: 500+ (MIL-STD-348 compliant)

3. Installation Requirements

• Tools Needed:

  • LMR-300 specific crimp tool

  • Cable prep tool (strip length: 12mm ±0.5mm)

• Crimp Sequence:

  1. Center conductor crimp (2.8mm protrusion)

  2. Braid trim and fold-back

  3. Outer shield crimp (40-50 lbs force)

• Torque: 15 in-lbs for connector mating

4. Performance Data

• Insertion Loss:

  • 0.18 dB @ 2 GHz

  • 0.35 dB @ 6 GHz

• Pull Strength: >100N (properly installed)

• Temp Range: -40°C to +85°C

5. Typical Applications

• Cell tower jumpers

• Distributed antenna systems (DAS)

• RF test equipment interfaces

• Military field radios

6. Compliance & Notes

• Standards: MIL-PRF-39012, RoHS 3

• Weatherproofing: Requires additional sealant for outdoor use

• Note: Always perform continuity test after installation

Synergy is Indian Antenna and RF Co-axial Cable assembly manufacturer. We deal in rf connector, rf Co-axial Cable, all types of antenna, antenna cables, jumper cables, microwave components, att, dummy loads, dc block, splitter, Duplexer, Couplers, Combiners, low pim test cables, tools, Ibs n bts product, GPRS, rfid product''s, Iot products, and 5g products for smart city,, pls confirm if any enquiry across..

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, adapters, attenuators, baluns and termination.

Features:

• Resistant to corrosion

• Perfect finish

• Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

The BNC(M) RG-59 Compression Connector is a male bayonet-style RF connector designed for RG-59 coaxial cable, commonly used in CCTV, broadcast, and telecommunications setups. Here's a quick overview of its key features based on models like the one from Synergy Telecom:

• Impedance: 50 Ohms – ensures efficient signal transmission
• Frequency Range: DC to 3 GHz – suitable for medium-frequency RF applications
• VSWR: ≤1.15 – minimizes signal reflection
• Dielectric Strength: ≥2500V RMS – handles high-voltage surges
• Contact Resistance: Center ≤1.0 mΩ, Outer ≤0.25 mΩ – for low signal loss
• Termination: Compression-style – quick, tool-assisted installation
• Materials:
  • Body: Brass with nickel plating
  • Center Contact: Gold or silver-plated brass
  • Insulator: PTFE (Teflon)
• Operating Temperature: –40°C to +85°C – suitable for indoor and outdoor use
• Applications: CCTV systems, video transmission, RF signal routing, and telecom infrastructure

Compression connectors are great for field installations—they offer a secure, weather-resistant seal without soldering. Want help choosing a compression tool or comparing it to a crimp version? I can help you weigh the options.