Synergy Telecom Private Limited

SMA female straight Bulkhead solder connector for semi rigid cable
1. Frequency range:- DC to 6GHz.
2. Impedance:- 50ohms
3. V.S.W.R:- 1.15
4. Insulation resistance:- 5000M
5. Best price.

Product Specification:-

• Material Type : Body: Brass , Outer Contact:Brass , Center contact:Bronze , Fastener:Brass , Dielectric:PTFE
• Brand Name : RF Connector House
• Pkg Qty : 1
• Temperature : (-)40 C-(+)85 C
• Specifications : Durability Mating Cycle: 500 , Termination Cable retention: 300N N , Apply with the Electric cable,VSWR: 1.10(0~2.2G) 1.15(0~3G),Insertion Loss: 0.08dB (@2200MHz) ,Dielectric Resistance: 5000 m
• Finish Type : Gold , Cusunz , Au , Ni
• Model Text : LMR-100
• Input Impedance : 50 ohm
• Frequency Range : DC-3 GHz

SMA (SubMiniature version A) connectors are semi-precision coaxial RF connectors developed in the 1960s as a minimal connector interface for coaxial cable with a screw-type coupling mechanism. The connector has a 50 Ω impedance

Any new enquiry of antennas, rf Co-axial Cable assembly across Good luck 
Synergy is Indian Antenna and RF Co-axial Cable assembly manufacturer. We deal in rf connector, rf Co-axial Cable, all types of antenna, antenna cables, jumper cables, microwave components, Attenuator, dummy loads, dc block, splitter, Duplexer, Couplers, Combiners, low pim test cables, tools, Ibs n DAS product, GPRS, rfid product's, Iot products, and 5g products for smart city,, pls confirm if any enquiry across..

N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 

The WR34 to SMA Female waveguide adapter is designed for high-frequency applications, operating in the 21.7 GHz to 33 GHz range. It features a WR-34 waveguide interface with an SMA female coaxial connector, ensuring low insertion loss and high signal integrity.

Key specifications:

• Waveguide Type: WR-34
• Connector Type: SMA Female
• Frequency Range: 21.7 GHz – 33 GHz
• VSWR: Typically 1.40 or lower
• Flange Type: FBP260 (Cover)
• Material: Copper with silver plating
• Application: Microwave, millimeter-wave, and test setups

The WR42 to SMA Female waveguide adapter is designed for high-frequency applications, operating in the 18 GHz to 26.7 GHz range. It features a WR-42 waveguide interface with an SMA female coaxial connector, ensuring low insertion loss and high signal integrity.

Key specifications:

• Waveguide Type: WR-42
• Connector Type: SMA Female
• Frequency Range: 18 GHz – 26.7 GHz
• VSWR: Typically 1.25:1 or lower
• Flange Type: UBR220 (Square Cover)
• Material: Brass or Aluminum with silver plating
• Application: Microwave, millimeter-wave, and test setup

The WR51 to SMA Female waveguide adapter is designed for high-frequency applications, operating in the 15 GHz to 22 GHz range. It features a WR-51 waveguide interface with an SMA female coaxial connector, ensuring low insertion loss and high signal integrity.

Key specifications:

• Waveguide Type: WR-51
• Connector Type: SMA Female
• Frequency Range: 15 GHz – 22 GHz
• VSWR: Typically 1.3:1 or lower
• Flange Type: Square Cover (WR51F)
• Material: Aluminum or Brass with silver plating
• Application: Microwave, millimeter-wave, and test setups

The BNC Female to SMA Male Adapter is a precision coaxial adapter that enables seamless connectivity between BNC and SMA interface types. Designed for RF applications up to 4 GHz, this adapter combines a bayonet-style BNC female connector with a threaded SMA male interface, offering secure, low-loss performance in various RF systems.

• Connector 1: BNC Female (Bayonet Coupling)

• Connector 2: SMA Male (Threaded Interface)

• Impedance: 50 Ohm

• Frequency Range: DC to 4 GHz (typical), some models up to 6 GHz

• VSWR: ≤ 1.3

• Material:

  • Body: Brass or Stainless Steel (Nickel-plated or Passivated)

  • Center Contact: Beryllium Copper, Gold-plated

• Durability: ≥ 500 mating cycles

The SMA Male Bulk Head 4-Hole Flange Mount RF Coaxial Connector (26.5 GHz) is designed for high-frequency RF and microwave applications, providing secure threaded coupling and excellent electrical performance. The connector supports frequencies up to 26.5 GHz with low VSWR and high reliability. It is used for panel or bulkhead mounting in RF test equipment, antenna interfaces, communication systems, and measurement instruments.

The SMA Male 2-Hole Flange Clamp Type RF Coaxial Connector is a high-precision microwave connector designed for secure panel-mount installations in RF and high-frequency communication systems. It provides excellent electrical performance, low VSWR, and reliable mechanical stability, making it suitable for high-frequency transmission and compact system integration.

The SMA Female Bulkhead 4-Hole 26.5GHz Connector is a high-precision RF coaxial connector designed for secure panel mounting using a four-hole flange interface. The connector provides excellent mechanical stability with a threaded SMA interface to ensure low signal loss and consistent high-frequency performance. It is widely used in RF and microwave applications including antennas, test instruments, communication equipment, aerospace, and defense systems.

SMA male right angle to SMA male right angle LMR 200 cable, we are offering this SMA male right angle to SMA male right angle LMR 200 cable in best price,
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:
Resistant to corrosion
Perfect finish
Long lasting life 

High frequency 1.85mm female to 2.4mm male adapter

FREQUENCY: DC 3 GHZ
IMPEDENCE : 50 OHMS

VSWR: 1.2:1

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

SMA female 2 hole connector coaxial end
1. Frequency range:- DC to 18GHz.
2. Impedance:- 50ohms
3. V.S.W.R:- 1.15
4. Insulation resistance:- 5000M
5. Best price.

Impedan - 50Ω Frequency - 4Ghz VSWR - 1.15:1 (Max) Dielectric Resistance - ≥5000MΩ Contact Resistance - Center Contact ≤3mΩ Outer Contact ≤2.5mΩ Operating Temp - -40℃～+85℃

SMA male straight side PCB connector
 1. Bodies: Brass or stainless steel
2. Female contacts: Beryllium copper
3. Insulators:  PTFE Teflon
4. Gasket: Silicone Rubber
5. Plating Bodies: Gold plated or passivated
6. Plating Center contacts: Gold plated
7. Frequency range:- DC to 18GHz.
8. Impedance:- 50ohms

• Impedance: Non-constant (nominal 50Ω)

• Frequency Range: DC to 300 MHz

• Voltage Rating: Typically up to 500V RMS

• VSWR: ≤ 1.3 (varies by frequency and installation)

• Connector Type: UHF (PL Series)

• Gender: Female (Jack)

• Mounting Style: 2-Hole Flange Mount

• Termination Style: Solder

• Panel Hole Spacing: Standard for UHF flange type (typically ~19 mm center-to-center)

• Body: Brass or Zinc Alloy

• Center Contact: Brass or Beryllium Copper

• Plating: Nickel or Silver (body), Gold or Silver (contact)

• Insulator: PTFE (Teflon)

• Operating Temperature: -65°C to +165°C

• Humidity Resistance: MIL-STD compliant (varies by manufacturer)

• Corrosion Resistance: High, due to plating and sealed design

• Secure 2-hole flange mount for rigid installations

• Solder termination for strong electrical and mechanical connection

• Suitable for RF applications up to 300 MHz

• Rugged design for outdoor or indoor use

• Economical and widely compatible in legacy systems

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as alsoHigh Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.
RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as alsoHigh Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.
RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female includingHigh Frequency adaptors 2.4/2.92/3.5mm etc.
RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including PrecisionHigh frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.