Synergy Telecom Private Limited

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

The given code N F 1-2 LDF CLAMP1 appears to represent the specification of an RF connector based on the format you use. Here's a breakdown of its components:

1. N: This indicates the RF connector type. In your system, "N" corresponds to an N-type connector, which is widely used in RF applications for its robust design and superior performance in high-frequency systems.

2. F: This denotes the gender of the connector. "F" corresponds to Female, meaning this connector has a socket-style interface.

3. 1-2 LDF: This specifies the cable type the connector is designed for. "1-2 LDF" likely refers to a 1/2 inch Low-Density Foam cable, a type of coaxial cable known for low loss and suitability for high-frequency applications.

4. CLAMP1: This indicates the joining or termination method. "CLAMP" refers to a Clamp-type connection, which uses clamping mechanisms to secure the connector to the cable, ensuring reliability and ease of installation. The "1" might signify a specific subtype or version of this clamping mechanism.

This part, N F 1-2 LDF CLAMP1, represents an N-type female connector designed for use with 1/2 inch Low-Density Foam coaxial cables. The connection method is a clamp-type mechanism, offering secure and efficient cable termination. These connectors are commonly used in RF systems like telecommunications, defense, aerospace, and broadcasting, where reliable, low-loss connections are essentia

The term DIN F 1/2" LDF CLAMP refers to a specific type of RF connector designed for use with 1/2" LDF (Low Density Foam) coaxial cables. Here’s a breakdown of each component in the term:

1. DIN: This specifies the connector type as a 7/16 DIN connector, which is a standardized RF connector known for its robustness and reliability, typically used in high-power transmission applications such as telecommunications and broadcasting.

2. F: This indicates the gender of the connector, in this case, Female. Female connectors have a receptacle for the pin of the male connector.

3. 1/2" LDF: Refers to the specific coaxial cable type. The 1/2" LDF cable is a low-density foam dielectric cable commonly used in RF applications due to its excellent electrical performance, low attenuation, and durability.

4. CLAMP: Denotes the end joining type of the connector. A Clamp-type connector uses a clamping mechanism to secure the cable to the connector, providing a strong mechanical and electrical connection.

DIN F 1/2" LDF Clamp connectors are widely used in telecommunications, RF transmission lines, and base station systems. They are preferred for their high-frequency handling capabilities, secure attachment, and compatibility with rugged outdoor environments.

If you'd like, I can also create technical content or promotional material for this product! Let me know.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

 Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 
 

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

 Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

 Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 
 

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

 Specification:

Electrical Characteristics:

Mechanical Characteristics:

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ
 

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

Synergy Telecom Pvt Ltd is a leading provider and manufacturer of Telecom Equipment, Antennae, Cable assemblies, Microwave Components, IoT and M2M learning, IOT, RFID, SMART CITY, HIGH SPEED TRAINS RAILWAY NETWORK, DAS/ IBS and BTS installation materials, Solar passive components, and solutions. We focus on research and production and maintain a large inventory of fast-moving materials like Cable, Cable Assemblies, Connectors, Passive RF components, and Installation materials. We are approved vendors of BEL, ITI, DRDO, RAILWAYS, ISRO, Private Telecom Operators, BSNL. We believe in creating value for our customers by continuous improvement of products, service quality, and customer satisfaction

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ
 
 

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ
 
 

Co-Axial Connectors & Adapters:- 7/16DIN, N, SMA, TNC, BNC, SMZ, SMB, SSMB,SMC, C3, C4, C5, KMX3, BMA, BMC, FMA, MICRO DOT, MIM, NEC TYPE, QLNA, QLN, QSMA, QMA, SMP, TC4, TWIN, Mini BNC, SSMB, Type 43, FME, TNF, TQ, SMC, M4, ERI, UHF Connectors for all kind of cables.We can supply u K-type ,1.85mm,2.4mm,2.9mm connectors in mil grade ,cable assembly and adeptors
 and Customized coaxial jumper cable 

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

creating value for our customers by continuous improvement of products, service quality, and customer satisfaction.

We provide products from dc through microwave and milli-meter wave frequencies to our international commercial and military customers who are involved in high-frequency industries including radar, communications, high energy physics, satellites, industrial heating, medical electronics, etc.

Established in 2000, Synergy Telecom has developed and maintains long-term high integrity relationships with many manufacturers throughout India and with many customers throughout the world.

We are unique in our industry because we do not limit ourselves to the provision of hardware; we take pride in providing technical consultation and engineering advice, working with our worldwide customers to solve their problems.

We conform to INDIAN Government export regulations and for the security of both customer and manufacturer alike; provide complete commercial, engineering and logistics support.

Please have a look around our website to learn more about how SYNERGY TELECOM can help bring your next project to successful completion.

Synergy offering include

MINI UHF M LMR 200 CRIMP refers to a type of coaxial cable connector and the specific cable it is designed for, used primarily in radio frequency (RF) and telecommunications applications. Here’s a breakdown of the components:

• MINI UHF M: This refers to a miniaturized version of the UHF (Ultra High Frequency) connector. "M" indicates a male connector, which typically has a center pin that connects to the center conductor of the cable.

• LMR 200: This is a specific type of coaxial cable, known for its low-loss and flexible properties, used in applications like wireless communication, networking, and RF signal transmission. The "200" part refers to its specific diameter (approximately 0.200 inches).

• CRIMP: This term refers to the method of attaching the connector to the cable. A crimping tool is used to secure the connector to the coaxial cable, ensuring a stable electrical connection. This method is often preferred for its durability and ease of use.

Thus, MINI UHF M LMR 200 CRIMP is a male mini UHF connector that is designed to be attached to LMR 200 coaxial cable using the crimping technique. It is commonly used in RF and telecommunication systems for connecting antennas, transmitters, and receivers.

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ
 
4.3 1.0 connector

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.