Synergy Telecom Private Limited

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

Synergy offering include
RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.
RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 10/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.
RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.
RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.
RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna
Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS
Waveguide Products: Straight, Bend, Twist, flexible, elliptical waveguides and waveguide parts like Tee, Transitions, Loads, Couplers, Isolators, Joints, Shorts etc.
Telecom Equipment: Complete range of telecom access equipment that include Wireless Home Gateways, Portable Hot Spot, M2M modules and solutions, Indoor and Outdoor Routers based on GSM, WCDMA and LTE Technologies.
Electronic Instruments: High end test equipment like LOW PIM Testers, Communication Test Sets for 2G/3G/4G.
Tools:  Complete range of tools, tool kits, and electronic instruments like Multi-meters etc. from reputed Taiwan Company.
Solar: Solar connectors(MC4, MC4 branch, diode connectors, fuse connectors, tools including crimping tools including hydraulic, wrench, cutting tools), DC and AC solar UV protected cables and cable assemblies.
Optical: All optical fibers, connectors and their patch chords, pigtails, attenuators, FDMS.
ODN (passive Optical Distribution Network): LIU/FMS (Rack Mounted, Fixed/Sliding Type, 6F/12F, 24F, 48F, 96F), PLC Splitters (Cassette , Steel Tube, ABS), FBT Couplers (All Ratios), Fiber Distribution Box & Fiber Termination Box (Wall & Pole Mount), HTB (Home Termination Box), ODF (64F to 1024F & Higher), Joint Enclosures, Patch Cords, Pigtails, Optical Connectors, Adaptors, Attenuators and all FTTH Accessories. 
Active PON: GPON OLT (8 Port), GPON ONT (Single Band & Dual Band), xPON ONT (Single & Dual Band). These are from major brands and tested in major Telco''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s networks. 
T&M: Optical Power Meter, OTDR, Splicing Machines (representing known brand)
Optical Fiber: G.652D, G.657A1/A2, G.652B
Optical Fiber Cable: G2F/4F/6F/12F Unitube Cable, Multitube Cable, Tight Buffer (used for Patch Cords), ADSS, CIPRI and all structures as per the specifications (Representing major manufacturers)
Optical Preform: G.652D, G.657A1/A2

Synergy is Indian Antenna and RF Cable assembly mfr, deal in rf connector, rf Cable, all types of antenna cables, mw components, Attenuator, splitter, Duplexer, Couplers, Combiners, tools, Ibs n DAS product, GPRS, rfid, Iot , 5g products for smart city,

A WR-112 twisted waveguide adapter is designed to alter the polarization of electromagnetic waves while maintaining efficient signal transmission. Operating in the 7.05 GHz to 10 GHz frequency range, these adapters are used in radar systems, satellite communications, and RF testing setups. They come in various twist angles, such as 30°, 45°, 60°, and 90°, ensuring flexibility in system design. With low VSWR and minimal insertion loss, WR-112 adapters provide reliable performance. Manufacturers like Mega Industries and Pasternack offer high-quality versions with different flange types, including CPRF and CPRG. Let me know if you need more details!

Synergy is Indian Antenna and RF Cable assembly mfr, deal in rf connector, rf Cable, all types of antenna cables, mw components, Attenuator, splitter, Duplexer, Couplers, Combiners, tools, Ibs n DAS product, GPRS, rfid, Iot , 5g products for smart city,

The N Female 4-Hole Panel Clamp Type Connector for RG58 Cable is a robust RF connector designed for secure panel mounting and reliable coaxial cable termination. Engineered for high-performance signal transmission, it features a 4-hole flange for stable installation and a clamp-style termination suitable for field assembly with RG58 coaxial cable.

• Connector Type: N-Type Female

• Mounting Style: 4-Hole Panel Mount Flange

• Termination Style: Clamp type (mechanical cable fastening)

• Cable Compatibility: RG58 coaxial cable

• Impedance: 50 Ohms

• Frequency Range: DC to 11 GHz (typically used up to 1 GHz with RG58)

• Body Material: Nickel-plated brass for durability and corrosion resistance

• Center Contact: Gold- or silver-plated brass for low signal loss

• Insulator: PTFE for excellent dielectric properties

• Ingress Protection: Weather-resistant when properly installed

• Operating Temperature: -55°C to +85°C

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

• Connector Type: TNC Male (Standard Pin, 50Ω)

• Cable Compatibility: LMR-300 (50Ω, 8.0mm/0.315" OD)

• Termination: Clamp-Style Compression

• Frequency Range: DC–6 GHz

• Impedance: 50Ω

✔ High-Performance Clamp Design

• Radial compression for uniform shield contact

• Integrated strain relief prevents cable pull-out

• Tool-assisted installation (no soldering required)

✔ Durable Construction

• Nickel-plated brass body (corrosion-resistant)

• PTFE dielectric (low loss, stable RF performance)

• O-ring seal (IP67-rated when properly installed)

✔ Electrical Performance

• VSWR: <1.25:1 (typical up to 6 GHz)

• Insertion Loss: <0.25 dB @ 3 GHz

• Mating Cycles: 500+ (MIL-STD-348 compliant)

✔ Environmental Ratings

• Operating Temp: -40°C to +85°C

• Weatherproof: IP67 (with proper sealing)

Required Tools:

• LMR-300-specific clamp tool

• Cable stripper (strip length: 12mm ±0.5mm)

Step-by-Step Installation:

1. Strip Cable:

   • Outer jacket: 12mm

   • Braid: Fold back evenly over clamp base

   • Center conductor: 3mm protrusion

2. Assemble Connector: Insert cable into clamp mechanism

3. Compress: Use tool to secure shield & outer jacket

4. Final Check:

   • Ensure no braid strands touch center conductor

   • Verify O-ring is seated properly

Torque Specs:

• Connector mating: 15–20 in-lbs

• Clamp compression: Follow tool manufacturer’s guidelines

• Cellular & RF repeater systems

• Broadcast antenna feeds

• Military & aerospace communications

• Outdoor wireless links

• Standards: MIL-STD-348, RoHS/REACH compliant

• Warning:

  • For LMR-300 only – do not use with other cable types

  • Avoid over-tightening (may deform O-ring)

  • For extreme environments, use additional sealing (coax seal tape)

• Connector Type: TNC Male (Standard Pin, 50Ω)

• Cable Compatibility: LMR-400 (50Ω, 10.3mm/0.405" OD)

• Termination: Clamp-Style Compression

• Frequency Range: DC–6 GHz

• Impedance: 50Ω

✔ Heavy-Duty Clamp Design

• Radial compression for superior EMI shielding

• Integrated strain relief prevents cable pull-out

• Tool-assisted installation (no soldering required)

✔ Robust Construction

• Nickel-plated brass body (corrosion-resistant)

• PTFE dielectric (low loss, stable RF performance)

• O-ring seal (IP67-rated when properly installed)

✔ Electrical Performance

• VSWR: <1.20:1 (typical up to 6 GHz)

• Insertion Loss: <0.20 dB @ 3 GHz

• Mating Cycles: 500+ (MIL-STD-348 compliant)

✔ Environmental Ratings

• Operating Temp: -40°C to +85°C

• Weatherproof: IP67 (with proper sealing)

Required Tools:

• LMR-400-specific clamp tool

• Cable stripper (strip length: 15mm ±1mm)

Step-by-Step Installation:

1. Strip Cable:

   • Outer jacket: 15mm

   • Braid: Fold back evenly over clamp base

   • Center conductor: 3mm protrusion

2. Assemble Connector: Insert cable into clamp mechanism

3. Compress: Use tool to secure shield & outer jacket

4. Final Check:

   • Ensure no braid strands touch center conductor

   • Verify O-ring is seated properly

Torque Specs:

• Connector mating: 18–22 in-lbs

• Clamp compression: Follow tool manufacturer’s guidelines

• Cellular base stations

• Broadcast antenna systems

• High-power RF transmission

• Military communications

• Standards: MIL-STD-348, RoHS/REACH compliant

• Warning:

  • For LMR-400 only – verify cable OD before installation

  • Avoid over-tightening (may deform O-ring)

  • For harsh environments, use additional sealing (coax seal tape)

The N Female connector for ¼-inch coaxial feeder cable is a precision RF component designed to ensure secure and low-loss signal transmission. Featuring a threaded coupling mechanism, it provides excellent shielding and vibration resistance, making it ideal for telecom, broadcast, and microwave system applications. Built with a brass body, gold-plated center pin, and PTFE insulation, it supports up to 7.5 GHz frequency and 50-ohm impedance, delivering high durability and electrical performance in both indoor and outdoor environments.

The N Female 4 Hole Square Flange 25mm connector is a panel-mount RF connector designed for secure attachment in various applications. Here are some key features:

• Impedance: 50 ohms
• Frequency Range: DC to 11 GHz
• VSWR: ≤1.15@DC-6GHz
• Material: Brass body with nickel plating, PTFE insulator, and phosphor copper center conductor
• Durability: Rated for 500 mating cycles
• Environmental Resistance: Operates between -40°C to +85°C

This type of connector is commonly used in RF, microwave, and telecommunications applications, ensuring reliable signal transmission. Let me know if you need more details!The N Female 4 Hole Square Flange 25mm connector is a panel-mount RF connector designed for secure attachment in various applications. Here are some key features:

• Impedance: 50 ohms
• Frequency Range: DC to 11 GHz
• VSWR: ≤1.15@DC-6GHz
• Material: Brass body with nickel plating, PTFE insulator, and phosphor copper center conductor
• Durability: Rated for 500 mating cycles
• Environmental Resistance: Operates between -40°C to +85°C

This type of connector is commonly used in RF, microwave, and telecommunications applications, ensuring reliable signal transmission. Let me know if you need more details!

A well-designed WR42 to WR34 rectangular waveguide transition is critical for maintaining signal integrity and minimizing losses in microwave equipment applications. By ensuring proper design, materials, and construction techniques, such transitions enable efficient transmission of electromagnetic waves across different waveguide sizes while meeting performance and reliability requirements. Understanding the specific dimensions, frequency ranges, and performance criteria ensures the transition effectively supports various microwave system applications, including telecommunications, radar systems, and scientific research.

2.92mm  3.5mm F RA PCBConnector 2.92 1.82 3.5mm
RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.
RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.
RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna 
1. Frequency range:- DC to 6GHz.
2. Impedance:- 50ohms
3. V.S.W.R:- 1.15
4. Insulation resistance:- 5000M
5. Best price.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

The Rohde & Schwarz ZV-Z23 is a TOSM calibration kit designed for 3.5 mm connectors and supports frequencies up to 26.5 GHz. It’s part of the high-precision ZV-Z2xx series, tailored for vector network analyzer (VNA) calibration. Here’s what makes it stand out:

• Connector Type: 3.5 mm (female)
• Frequency Range: DC to 26.5 GHz
• Calibration Standards: Includes Through, Open, Short, and Match (TOSM)
• Characterization: Each kit is individually characterized using S-parameters, ensuring high accuracy
• Accessories: Comes with a torque wrench, counterholder, and a USB stick containing calibration data
• Use Case: Ideal for precision VNA calibration in lab and production environments

You can find more details on the R&S ZV-Z2xx product page or check availability through resellers like Axiom Test Equipment and Instrumex, where it’s listed for around $3,100 USD.

Want help comparing it with the ZV-Z21 or checking if it fits your setup?

The BNC (Male) crimp connector is designed for use with RG316, RG174, RG179, and LMR100 coaxial cables. It provides a secure and durable connection for various applications, including telecommunications, broadcasting, and test equipment.

Key Features:

• Reliable Connection: Crimp-on design ensures a strong and lasting connection.
• High-Frequency Performance: Supports frequencies up to 3 GHz.
• Durable Construction: Made of brass with white bronze plating for corrosion resistance.
• Easy Installation: Simple crimping process for quick setup

• BNC (Bayonet Neill-Concelman): A common RF connector used in video, radio, and networking applications.

• F-F-F: Indicates a female-to-female-to-female adapter, meaning it has three female ports.

1. BNC Female to Dual F Female (Splitter) – Allows one BNC input to split into two F-type outputs.

2. F-F-F Coupler with BNC Adapter – Could be a triple female adapter where one side is BNC, and the other two are F-type.

3. BNC Male to Triple F Female – Used for converting or extending connections between BNC and F-type cables.

• CCTV camera installations (BNC for video, F-type for coaxial power or signal splitting).

• RF signal distribution in broadcast or ham radio setups.