Synergy Telecom Private Limited

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ
 

A WR75 to SMA Female adapter is a precision-engineered RF component that transitions signals from a WR75 waveguide (typically 9.84–15 GHz) to an SMA female coaxial connector. It features a UBR120 flange, supports low insertion loss (around 0.25 dB), and maintains a VSWR of 1.25:1, ensuring efficient signal transfer with minimal reflection. These adapters are available in straight or right-angle configurations, often constructed from aluminum alloy with a chemical film finish for durability. Commonly used in radar, satellite communication, and test systems, they bridge waveguide and coaxial technologies in compact, high-frequency setups. 

The WR430 to N Female waveguide-to-coax adapter is designed to transition signals from a WR-430 rectangular waveguide (typically operating between 1.7 to 2.6 GHz) to a 50-ohm N-type female coaxial connector. These are commonly used in L-band radar, satellite uplinks, and high-power microwave systems.

Here are a few solid options:

• HASCO HWCA-430NF-RA: Right-angle design, UG437F flange, 6061-T6 aluminum, VSWR 1.20:1, insertion loss 0.15 dB. Priced around $911.25 USD.
• Fairview Microwave SMW430ACN: UDR22 flange, aluminum body, 1.7–2.6 GHz, right-angle design. This model has been discontinued, but alternatives are available.
• Pasternack: Offers a wide range of WR-430 adapters with CPR-430G and square cover flanges, priced between $535 and $2,530 USD, depending on specs.

•  1.1 Waveguide Type: WR90 to SMA Female
•  1.2 Connector Type: SMA Female
•  1.3 Flange Type: FBP100 (Cover)
•  1.4 Material: Copper
•  1.5 Inside Finish: Silver plating
•  1.6 Outside Finish: Corrosion protected with grey paint

• Gender:

  • DIN Female (accepts male DIN plug)

  • N Female (accepts male N plug)

• Impedance: 50Ω (standard for RF)

• Material: Brass/stainless steel body, gold/silver plating

• Frequency Range: Depends on DIN type (see table above)

• Coupling Mechanism:

  • DIN side: Threaded (screw-on)

  • N side: Threaded (5/8"-24 UNEF)

• Connecting DIN-based antennas (e.g., 7/16 DIN cell tower antennas) to N-type test equipment.

• Adapting 4.3-10 DIN small-cell radios to N-type RF cables.

• Lab setups requiring high-power or low-loss transitions.

•  

#ipx cable

#ufl cable

#test cable

#antenna cable

#feeder cable

#if cable

#signal cable

#utp cable,

#stp cable

#lan cable

#wan cable

#internet cable

#INTERNAL CABLE.

#INTERFACE CABLE.

#TX CABLE

#RX CABLE

#innovation #india #future #manufacturing #strategy #supplychain #warehousing #environment #sustainable ##complexity #fashion #shipping #fashionindustry #economy #textile #textiles #china #egypt #environmental #taxes #bangladesh #bangladesh #wastemanagement

• #Antenna

• #RF Connector

• #Coaxial Cable Assembly

• #TNC Connector

• #RF Adaptor

• #SMA Connector

• #RF Cable

• #RF Adapters inseries sma tnc din • #DIN Connector • #SMB Connector • #Telecom Cables • #RF COAXIAL Connectors • #Antenna IOT • #BNC Connector • #N Connector • Microwave Components • SFP Optical Transceiver • Telecom Tools • RF Cables • Gsm Antenna • Feeder Clamp • Optical Fiber Products • Cable Management Tools • Rj-45 Connector • Balun bnc smz rj45 50 75 120 600 • Solar PRODUCT Installation Material • Gps Antenna • Omni Antenna • Rubber Masti…

[12:48, 31/10/2022] Pradeep: #ipx cable

#ufl cable

#test cable

#antenna cable

#feeder cable

#if cable

#signal cable

#utp cable,

#stp cable

#lan cable

#wan cable

#internet cable

#INTERNAL CABLE.

#INTERFACE CABLE.

#TX CABLE

#RX CABLE

• #Antenna

• #RF Connector

• #Coaxial Cable Assembly

• #TNC Connector

• #RF Adaptor

• #SMA Connector

• #RF Cable

SMA female to BNC male Adaptor, we are offering this SMA female to BNC male Adaptor in best price

The N Female 4 Hole LMR-200 Clamp is a connector designed for LMR-200 coaxial cables, commonly used in RF and communication applications. It features four mounting holes for secure attachment, ensuring proper cable management and alignment.

Here are some key specifications:

• Impedance: 50 ohm
• Frequency Range: DC-4 GHz
• VSWR: ≤1.15@DC-3 GHz
• Dielectric Withstanding Voltage: ≥1000V RMS, 50Hz
• Material: Brass body, PTFE insulator, phosphor bronze center conductor
• Temperature Range: -40°C to +85°C

You can check out more details or purchase options here or here. Let me know if you need help with installation or compatibility!

The N Female 4 Hole LMR-200 Crimp connector is designed for LMR-200 coaxial cables, offering a secure crimp connection for reliable signal transmission. It features four mounting holes for stable installation, making it ideal for RF applications, telecommunications, and outdoor setups.

Key Specifications:

• Impedance: 50 ohm
• Frequency Range: DC–6 GHz
• VSWR: Low-loss performance
• Material: Nickel-plated brass body, gold-plated center conductor
• Insulator: PTFE for high dielectric strength
• Application: RF systems, base stations, networking

You can check out more details or purchase options here or here. Let me know if you need help with installation or compatibility!

A DIN Female to N Male adapter is a coaxial RF connector used to interface between a device/cable with a male DIN connector and another with a female N-type jack. Below are the key details:

• DIN Female (Jack):

  • Threaded coupling (accepts male DIN plug).

• N Male (Plug):

  • 5/8"-24 UNEF threaded connector (mates with N female jack).

• Impedance: 50Ω (standard for RF).

• Material: Brass/stainless steel, gold-plated contacts.

• Frequency Range: Depends on DIN type (see table above).

•  

A BNC Female to F Female adapter is a compact coaxial connector designed to interface BNC-based test equipment with F-type (cable/satellite TV) systems.

• Connectors:

  • BNC Female (Jack): Bayonet-style quick-connect (50Ω or 75Ω)

  • F Female (Jack): 3/8"-32 threaded port (75Ω standard)

• Impedance: Optimized for 75Ω (video applications)

• Frequency Range: Up to 1 GHz (limited by F-connector)

• Material: Brass body with nickel/gold plating

•  

A DIN Male to N Female adapter is a rugged RF coaxial connector designed to bridge DIN-equipped systems with N-type infrastructure. This adapter features:

• Connectors:

  • DIN Male (Plug): Threaded coupling (typically 7/16 DIN or 4.3-10 DIN)

  • N Female (Jack): 5/8"-24 threaded interface (mates with N Male plugs)

• Impedance: 50Ω (standard for RF applications)

• Frequency Range:

  • 7/16 DIN: Up to 7.5 GHz

  • 4.3-10 DIN: Up to 10 GHz

• Construction: Brass/stainless steel body, gold-plated contacts

• Power Handling: High-wattage capable (ideal for cell towers & broadcast)

•  

T type SMA female to female to female adapter, we are offering this T type SMA female to female to female adapter in best price

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

A BNC Female 4-Hole Panel Mount Adapter is a type of RF (radio frequency) coaxial connector designed for mounting on a panel or enclosure. It features:

• Four mounting holes for secure attachment.
• BNC female interface, which allows connection to standard BNC male cables.
• Commonly used in telecommunications, broadcasting, test equipment, and security systems.

The BNC (M) LMR-200 CLAMP is a male bayonet RF connector designed for 50Ω impedance applications, commonly used in telecommunications, broadcasting, and signal testing. It supports a frequency range of DC to 3 GHz, ensuring optimal signal transmission with minimal loss.

This connector is constructed from brass with silver-plated contacts, offering excellent electrical conductivity and corrosion resistance. It features a clamp termination method, providing secure, low-loss connections that are easy to install. Additionally, the PTFE insulator enhances dielectric strength and thermal stability, making it reliable under varied environmental conditions.

The BNC (M) LMR-400 CLAMP is a male bayonet RF connector designed for 50Ω impedance applications, commonly used in RF networks, telecommunications, and broadcasting. It supports a frequency range of DC to 4 GHz, ensuring reliable signal transmission with minimal loss.

This connector is made from brass, providing durability and excellent electrical conductivity. It features a clamp termination method, ensuring a secure connection while maintaining low signal attenuation. Additionally, it has a dielectric withstanding voltage of 1000V RMS, making it suitable for high-performance RF applications.

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ
 

The BNC (M) LMR-200 CLAMP is a male bayonet RF connector designed for 50Ω impedance applications, commonly used in telecommunications, broadcasting, and signal testing. It supports a frequency range of DC to 3 GHz, ensuring optimal signal transmission with minimal loss.

A BNC(M) LMR-400 crimp connector is a male BNC connector designed specifically for use with LMR-400 coaxial cable, offering a secure and low-loss RF connection. Here's a concise description based on industry-standard models like the L-com TC-400-BM-X-LC:

• Connector Type: BNC Male (Bayonet-style coupling)
• Cable Compatibility: LMR-400, LMR-400-DB, LMR-400-FR, and similar 400-series cables
• Attachment Method: Crimp/Solder hybrid (crimp for shield, solder or crimp for center pin)
• Impedance: 50 Ohms
• Frequency Range: DC to 6 GHz
• VSWR: Typically ≤1.3:1
• Insertion Loss: ≤0.25 dB
• Materials:
  • Body: Brass with tri-metal plating
  • Center Contact: Gold-plated brass
  • Insulator: PTFE (Teflon)
  • Crimp Sleeve: Brass with tri-metal plating
• Durability: Rated for 500 mating cycles
• Environmental Specs: Operates from –55°C to +125°C; meets MIL-STD shock, vibration, and thermal shock standards

The BNC(M) Right-Angle Crimp Connector for LMR-400 is a rugged, space-saving RF connector designed for high-performance coaxial cable terminations. Here's a quick snapshot of its key features based on models from Synergy Telecom and others:

• Connector Type: BNC Male, Right-Angle (R/A)
• Cable Compatibility: LMR-400 and equivalent 10.3 mm coaxial cables
• Impedance: 50 Ohms – ensures low-loss signal transmission
• Frequency Range: DC to 3–4 GHz
• VSWR: Typically ≤1.15 (0–3 GHz) – for optimal impedance matching
• Termination: Crimp-style for both shield and center conductor
• Materials:
  • Body: Brass with silver or nickel plating
  • Center Contact: Silver or gold-plated brass
  • Insulator: PTFE (Teflon)
• Dielectric Strength: ≥2500V RMS
• Contact Resistance: Center ≤1.0 mΩ, Outer ≤0.25 mΩ
• Operating Temperature: –40°C to +85°C
• Applications: Telecom, RF test setups, broadcasting, and tight enclosures

This connector is ideal when you need a sharp cable bend without compromising signal integrity. If you're planning to install one, I can walk you through the crimping steps or help you compare suppliers like Synergy Telecom or IndiaMART vendors. Just say the word.

BNC female to BNC female adaptor
1. Bodies: Brass or stainless steel
2. Female contacts: Beryllium copper
3. Insulators: PTFE Teflon
4. Plating Bodies: Gold plated nickel plated
5. Beat quality.

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ