Synergy Telecom Private Limited

RF Cables: HLF 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as alsoHigh Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.

RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as alsoHigh Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female includingHigh Frequency adaptors 2.4/2.92/3.5mm etc.

RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including PrecisionHigh frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.

RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna

Microwave Products: Attenuators, Splitters, Combiners, Couplers, RF Filters, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS 

• Weight50G
• Dimension13X13X13
• Model NumberST0M01
• Operating Temperature-30~60C Degree
• BrandRF CONNECTOR HOUSE
• Country of OriginMade in India

The 100 Watt N Male Dummy Load (DC-3GHz) by Synergy is a high-performance RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and N-type male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 100 Watts, it is ideal for indoor RF setups and network optimization. 

A 5 Watt N Male Dummy Load is a compact device used in RF applications to safely dissipate unwanted signals. Designed with a 50-ohm impedance, it helps prevent signal reflections, ensuring accurate testing and measurements. It operates across a wide frequency range, typically 0-3GHz, making it suitable for various telecommunications and broadcasting setups. Its robust build allows it to handle up to 5 Watts of power without overheating. The N Male connector ensures secure and reliable connections, making it an essential component for laboratories, wireless networks, and antenna testing environments. Let me know if you need specifications or buying options!

IndiaMART lists various dummy loads, including N Male 10 Watt Dummy Loads. These RF termination devices are designed to absorb excess RF energy, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. They typically operate across a DC to 3 GHz frequency range and are built with durable materials for stable performance in telecommunications, defense, and aerospace industries.

For specific details on Synergy Telecom's 10W N Male Dummy Load, you can check IndiaMART's listings here or here. 

The 2 W N M Dummy Load 3GHz by Synergy is a compact RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and N-type male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 2 Watts, it is ideal for indoor RF setups and network optimization. 

The 1 W N M Dummy Load 3GHz by Synergy is a compact RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR (max 1.02) and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and N-type male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 1 Watt, it is ideal for indoor RF setups and network optimization.

The 5W DIN Type Dummy Load (DC-3GHz) by Synergy is a compact RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and DIN male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 5 Watts, it is ideal for indoor RF setups and network optimization. 

The 0.5 W SMA M Dummy Load (3 GHz) is a compact RF termination device designed for low-power applications. It features an SMA male connector, ensuring secure connections and excellent impedance matching. Operating up to 3 GHz, it provides a 50-ohm impedance, making it ideal for testing and calibration in RF systems. The dummy load absorbs RF power and dissipates it as heat, preventing signal radiation. With a VSWR of <1.3:1, it offers efficient performance. Constructed from durable materials like aluminum or stainless steel, it ensures longevity. Commonly used in laboratories and telecommunications, it aids in accurate RF measurements.

The 25 Watt N Male Dummy Load by Synergy is a high-performance RF termination device designed for absorbing excess RF energy in testing and signal transmission applications. It operates across a DC to 3 GHz frequency range, ensuring low VSWR and 50-ohm impedance for minimal signal reflection. Built with a durable brass body and N-type male connector, it provides stable performance in telecommunications, defense, and aerospace industries. With an average power handling of 25 Watts, it is ideal for indoor RF setups and network optimization. 

An Anritsu dummy load is a type of test equipment used to simulate a load for RF and microwave systems, typically in the context of testing and calibrating RF equipment. Dummy loads are essential in ensuring that RF components and systems are operating correctly without actually transmitting a signal over the air. Here’s a detailed look at what Anritsu dummy loads are and their functions:

A dummy load is a non-reactive, resistive device designed to absorb RF power and convert it into heat, thereby preventing reflections or damage that might occur if RF energy were reflected back into the transmitter or other RF equipment.

1. Power Handling: Anritsu dummy loads are designed to handle specific power levels, which can vary from low power (a few watts) to high power (kilowatts), depending on the model. They are rated to dissipate RF power without damage.

2. Frequency Range: They are usually specified to work over a certain frequency range, which can be from DC up to several GHz. Some models are designed to operate over wide frequency ranges to accommodate various testing needs.

3. Connector Type: Dummy loads come with different types of connectors, such as N-type, SMA, or other RF connectors. The connector type should match the connectors on your test equipment.

4. Precision and Accuracy: High-quality dummy loads provide precise impedance matching (typically 50 ohms) to ensure minimal reflection and accurate measurements. This is crucial for reliable test results.

5. Thermal Management: Since dummy loads convert RF power into heat, they are equipped with thermal management features such as heat sinks or cooling systems to dissipate the heat effectively.

1. Testing and Calibration: Dummy loads are used to test and calibrate RF transmitters, amplifiers, and other RF components. By using a dummy load, you can ensure that the equipment operates correctly without broadcasting a signal.

2. Maintenance: They are used in maintenance routines to check the performance of RF systems and troubleshoot issues without causing interference.

3. Safety: Using a dummy load during testing prevents the potential hazards associated with high-power RF emissions.

When selecting a dummy load, consider the following factors:

• Power Rating: Ensure that the dummy load can handle the maximum power output of your equipment.
• Frequency Range: Choose a dummy load that covers the frequency range of your testing requirements.
• Connector Type: Make sure the dummy load has the appropriate connector type for your equipment.
• Cooling Requirements: Depending on the power levels involved, ensure the dummy load has adequate cooling or heat dissipation features.

Anritsu dummy loads are essential tools for testing and calibrating RF equipment. They simulate the electrical load that would normally be presented by an antenna, allowing for safe and accurate testing of RF systems. To select the appropriate dummy load, match its specifications to your testing needs, including power handling, frequency range, and connector type.

10 watt termination, we are offering this 10 watt termination in best price.

The 50 W DIN Male Dummy Load (3 GHz) is a high-power RF termination device designed for testing and calibration in communication systems. It operates efficiently up to 3 GHz with a 50-ohm impedance, ensuring minimal signal reflection (VSWR ≤1.2:1). Built with aluminum or stainless steel, it provides excellent heat dissipation, preventing overheating. The DIN Male connector ensures secure integration into RF setups. This dummy load is ideal for high-power testing, calibration, and maintenance in mobile networks, radar systems, and satellite communications. Its compact design and rugged construction make it suitable for both indoor and outdoor applications.

The 2 W SMA Male Dummy Load (18 GHz) is a compact RF termination device designed for high-frequency applications. It operates efficiently from DC to 18 GHz with a 50-ohm impedance, ensuring minimal signal reflection (VSWR ≤1.2:1). Featuring an SMA Male connector, it integrates securely into RF systems, making it ideal for testing, calibration, and signal termination. Constructed from passivated stainless steel or aluminum, it offers durability and effective heat dissipation. Commonly used in microwave applications, communication systems, and laboratory environments, this dummy load ensures stable performance while preventing unwanted RF emissions. 

The 0.5 W SMA Male Dummy Load (3 GHz) is a compact RF termination device designed for low-power applications. It operates efficiently up to 3 GHz with a 50-ohm impedance, ensuring minimal signal reflection (VSWR <1.3:1). Featuring an SMA Male connector, it provides secure integration into RF systems, making it ideal for testing, calibration, and signal termination. Constructed from aluminum or stainless steel, it offers durability and effective heat dissipation. Commonly used in laboratory environments, communication systems, and microwave applications, this dummy load ensures stable performance while preventing unwanted RF emissions.