Synergy Telecom Private Limited

BNC female crimp connector for LMR 240 cable.
1. Bodies: Brass or stainless steel
2. Female contacts: Beryllium copper
3. Insulators: PTFE Teflon
4. Plating Bodies: Gold plated nickel plated
5. Beat quality.
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:
•Resistant to corrosion
•Perfect finish
•Long lasting life 

• Type: TNC Male Right-Angle (R/A)

• Cable Compatibility: LMR-200 (50Ω, 4.95mm/0.195" OD)

• Termination: Crimp-Style (Center Conductor + Shield)

• Frequency Range: DC–6 GHz

• Impedance: 50Ω

✔ Right-Angle Design

• 90° configuration for tight spaces

• Low-profile: ~20mm panel clearance

✔ Precision Crimp System

• Hexagonal crimp for 360° shield contact

• Positive center conductor retention

✔ Durable Construction

• Nickel-plated brass body

• PE dielectric (low loss)

• Corrosion-resistant finish

✔ Performance

• VSWR: <1.30:1

• Insertion Loss: <0.25dB @ 3GHz

• Mating Cycles: 500+ (MIL-STD-348)

Tools Required:

• LMR-200 crimp tool (e.g., Times Microwave CT-208)

• Cable stripper (9.5mm strip length)

Crimp Procedure:

1. Strip cable:

   • Outer jacket: 9.5mm

   • Center conductor: 2.5mm protrusion

2. Crimp center pin first

3. Fold braid, apply outer crimp

Torque: 10-12 in-lbs for mating

• Panel-mounted wireless equipment

• GPS antenna connections

• RF test setups

• Space-constrained installations

• MIL-STD-348

• RoHS compliant

Note:

• For outdoor use, apply silicone sealant

• Verify cable OD before installation

BNC male crimp connector for RG 6 cable.
1. Bodies: Brass or stainless steel
2. Female contacts: Beryllium copper
3. Insulators: PTFE Teflon
4. Plating Bodies: Gold plated nickel plated
5. Beat quality.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:

Resistant to corrosion

Perfect finish

Long lasting life 

BNC male crimp connector for RG 59 cable.
1. Bodies: Brass or stainless steel
2. Female contacts: Beryllium copper
3. Insulators: PTFE Teflon
4. Plating Bodies: Gold plated nickel plated
5. Beat quality.
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:
Resistant to corrosion
Perfect finish
Long lasting life 

• BNC Male (Plug):

  • Bayonet-style locking mechanism (quick-connect).

  • Impedance: Typically 50Ω (some 75Ω versions exist for video).

  • Frequency Range: Up to 2–4 GHz (depends on quality).

• UHF Female (SO-239 Jack):

  • Threaded screw-on coupling (5/8"-24 UNEF thread).

  • Impedance: ~50Ω (not precision-matched, best for <300 MHz).

  • Frequency Range: Up to 300 MHz (loss increases at higher frequencies).

• Connecting BNC-based test equipment (oscilloscopes, signal generators) to UHF-based radios, antennas, or CB equipment.

• Adapting lab instruments to amateur radio (HAM) or CB antenna systems.

• Temporary RF setups where UHF’s ruggedness is preferred over BNC’s higher frequency capability.

• Impedance Mismatch: UHF connectors are not true 50Ω, which may cause minor signal reflections at high frequencies.

• Power Handling: UHF handles higher power than BNC (good for CB/AM radio).

• Durability: UHF’s threaded design is more vibration-resistant than BNC’s bayonet lock.

An N Female to BNC Female adapter is a precision RF coaxial connector designed to interface N-type and BNC equipment, both in female configurations. This adapter allows seamless connection between male BNC and male N-type plugs, commonly used in test labs and telecom systems.

• Connectors:

  • N Female (Jack): 5/8"-24 threaded (50Ω standard)

  • BNC Female (Jack): Bayonet-style (50Ω or 75Ω)

• Frequency Range:

  • Up to 4 GHz (limited by BNC)

  • Low VSWR (<1.3:1) for minimal signal loss

  •  

N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.

BNC female 4 hole connector.
1. Bodies: Brass or stainless steel
2. Female contacts: Beryllium copper
3. Insulators: PTFE Teflon
4. Plating Bodies: Gold plated nickel plated
5. Beat quality.

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

The BNC(M) LMR-400 Clamp is a male bayonet RF connector designed for 50Ω impedance applications, commonly used in RF networks, telecommunications, and broadcasting. It supports a frequency range of DC to 4 GHz, ensuring reliable signal transmission with minimal loss. Made from brass, it provides durability and excellent electrical conductivity. The clamp termination method ensures a secure connection while maintaining low signal attenuation. Additionally, it has a dielectric withstanding voltage of 1000V RMS, making it suitable for high-performance RF applications.

A compact RF connector designed for quick-connect BNC interfaces, this adaptor converts between BNC female and male terminals with a secure bayonet coupling mechanism. Featuring 50-ohm impedance and gold-plated contacts, it maintains signal integrity for frequencies up to 4GHz. The durable nickel-plated brass construction ensures reliable performance in test equipment, video systems, and RF applications.

Key Features:

• Quick-connect bayonet (BNC) coupling

• 50Ω impedance, 4GHz frequency range

• Gold-plated center conductor

• Nickel-plated brass body

BNC connector
1. Pin:- silver/ gold plated.
2. Body: brass/Nickel plated
3. Impedance:- 50 ohms
4. Frequency range:- Best
5. Best quality.
6. We have all types of RF cables for more details contact
with us.

• Resistant to corrosion
• Perfect finish
• Long lasting life

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ
 

Type BNC, male (plug), right angle, TC style connector for FBT-240, LMR-240, and TCOM-240 type cables.

BNC male right angle crimp connector for LMR 400 cable.
1. Bodies: Brass or stainless steel
2. Female contacts: Beryllium copper
3. Insulators: PTFE Teflon
4. Plating Bodies: Gold plated nickel plated
5. Beat quality.
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
 
Features:
Resistant to corrosion
Perfect finish
Long lasting life 

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ