Synergy Telecom Private Limited

The WR28 T0 2.92 mm FEMALE waveguide adapter is designed for high-frequency applications, operating in the 26.5 GHz to 40 GHz range. It features a WR-28 waveguide interface with a 2.92mm female coaxial connector, ensuring low insertion loss and high signal integrity.

Key specifications:

• Waveguide Type: WR-28
• Connector Type: 2.92mm Female
• Frequency Range: 26.5 GHz – 40 GHz
• VSWR: Typically 1.25:1 or lower
• Flange Type: Square cover or UBR320 options available
• Application: Microwave, millimeter-wave, and test setups

8 DFB cable is a multi-pair communication cable with 8 twisted pairs of conductors, each pair being individually shielded with foil, and the entire cable shielded with an overall braided screen. This design provides excellent protection against electromagnetic interference (EMI) and crosstalk, making it suitable for sensitive electronic applications like PCM, EPABX systems, RS485 data lines, and instrumentation.

A digital oscilloscope is an essential electronic test instrument used to observe, measure, and analyze varying signal voltages over time. It digitizes incoming analog signals and displays them on a screen as waveforms, allowing precise measurement of signal properties like amplitude, frequency, and phase. Digital oscilloscopes are widely used in electronics design, troubleshooting, research, education, and manufacturing due to their accuracy, advanced features, and ease of use.

The Tektronix TDS 224 is a compact, four-channel digital real-time oscilloscope designed for general-purpose electronic testing. Here are its key specifications:

• Bandwidth: 100 MHz
• Sample Rate: 1 GS/s (real-time)
• Channels: 4 simultaneously sampled
• Record Length: 2,500 points per channel
• Vertical Resolution: 8 bits
• Vertical Sensitivity: 2 mV/div to 10 V/div
• Time Base Range: 5 ns/div to 50 s/div
• Input Impedance: 1 MΩ ±2%, 20 pF ±3 pF
• Trigger Types: Edge, Video, Pulse Width
• Display: ¼ VGA monochrome LCD
• Interface: RS-232 and Centronics ports (via optional TDS2CM module)
• Storage: Waveform storage and setup recall with optional TDS2MM module

It’s a solid bench-top scope for basic signal analysis and troubleshooting. Want help comparing it to newer models or sourcing one in India?

This is an RF coaxial SMA Male 50Ω Dummy Load / Terminator, designed to absorb RF signals without reflection. It protects RF systems from damage by properly terminating unused ports, ensuring low VSWR across a wide frequency spectrum. It is widely used in RF communication systems, antenna testing, and laboratory measurement equipment.

BQ Connector typically refers to a tool or integration designed to help connect and interact with BigQuery (BQ), a fully-managed data warehouse service provided by Google Cloud. BigQuery is used for large-scale data analytics, enabling fast SQL queries over massive datasets, and the BQ Connector can facilitate the connection between BigQuery and other data tools or platforms.

There are a variety of connectors available for BigQuery, depending on the use case, such as:

1. BigQuery Connector for Power BI: This connector allows users to import BigQuery data directly into Power BI for analysis and visualization, making it easier for business users to work with data stored in Google BigQuery without having to write complex queries.

2. BigQuery Connector for Excel: Similar to the Power BI connector, this allows Excel users to query and pull data from BigQuery into spreadsheets, enabling analysis and reporting using the familiar Excel interface.

3. BigQuery Connector for Data Studio: Google Data Studio provides a connector for BigQuery, allowing users to create interactive dashboards and reports using data directly pulled from BigQuery.

4. Third-Party Connectors: Tools like Talend, Fivetran, or Stitch also provide connectors for loading data into BigQuery or integrating BigQuery with other cloud services.

These connectors typically handle authentication, allow for query execution, and provide seamless integration with various applications, making it easier to leverage BigQuery’s powerful data storage and analytics capabilities within other systems.

• Data Integration: They enable seamless data extraction and integration from BigQuery to other platforms (e.g., BI tools, data pipelines, or reporting software).
• Real-Time Access: Some connectors allow for real-time or near-real-time data access, ensuring that the latest data is always available for analysis.
• User-Friendly Interfaces: Many connectors provide an easy-to-use interface, eliminating the need for extensive SQL knowledge or technical expertise.
• Security & Authentication: BigQuery connectors typically support secure authentication methods like OAuth 2.0 to ensure data access is secure.
• Scalability: Connectors make it easy to scale, whether for large datasets or expanding data workflows.

If you meant a specific BQ Connector or integration, feel free to provide more details, and I can dive deeper into it!

• Impedance: 50 Ohm

• Cable Type: Flexible (Flex Cable)

• Color: Black

• Outer Jacket Material: Black Polyethylene (PE)

• Jacket Outer Diameter: 27.5 mm

• Dielectric Material: Foamed Polyethylene

• Dielectric Diameter: 22.5 mm

• Inner Conductor: Corrugated Copper Tube

• Inner Conductor Diameter: 9.1 mm

• Outer Conductor: Corrugated Aluminum Tube

• Outer Conductor Diameter: 24.8 mm

• Ideal for RF transmission lines in:

  • Base stations

  • Indoor/outdoor telecom infrastructure

  • Installations requiring moderate flexibility and lighter weight due to aluminum outer conductor

• Corrugated Copper Inner Conductor: Excellent conductivity and flexibility

• Foamed PE Dielectric: Low loss, high insulation properties

• Corrugated Aluminum Outer Conductor: Provides EMI shielding while reducing overall cable weight

• PE Jacket: Weather-resistant, suitable for outdoor applications

• Compact Diameter: Easier handling and routing in constrained environments

The 8D-FB Coaxial Cable is a high-performance RF coaxial cable used for long-distance signal transmission with minimal loss. It is widely utilized in telecommunication, wireless networks, antenna feeder systems, and broadcasting applications where low attenuation and high shielding effectiveness are essential.

• Impedance: 50 Ohms

• Inner Conductor: Solid copper or copper-clad aluminum (CCA), ~2.75 mm diameter

• Dielectric: Foamed polyethylene (PE), ~7.2 mm diameter

• Shielding:

  • Aluminum foil

  • Braided copper or aluminum wire (high shielding effectiveness)

• Outer Jacket: UV-resistant PVC or PE, ~11.0 mm diameter

• Attenuation: Very low signal loss; e.g., ~6.2 dB per 100 meters at 1000 MHz

• Operating Temperature: –40°C to +80°C

• Frequency Range: DC to 3 GHz (typical)

The Tektronix TDS 220 is a dual-channel digital real-time oscilloscope designed for general-purpose electronic signal analysis. It features a compact and lightweight form factor, making it suitable for both laboratory and field use. With a bandwidth of 100 MHz and a sampling rate of 1 GS/s, the TDS 220 delivers accurate capture and display of fast-changing signals. The oscilloscope includes an easy-to-read LCD display, on-screen measurement functions, and automatic setup capabilities, enabling efficient waveform analysis for both novice and experienced users. Its user-friendly interface and robust performance make it ideal for troubleshooting, design validation, and education.

The ATTEN 8586 is a professional-grade 2-in-1 digital rework station combining a hot air gun and a soldering iron in one compact unit. It’s designed for soldering, desoldering, and reworking surface-mount and through-hole components on PCBs. Ideal for repair and maintenance of electronic circuits and devices.

The Tektronix TDS 220 is a compact, two-channel digital real-time oscilloscope designed for general-purpose signal analysis. Here are its key specifications:

• Bandwidth: 100 MHz
• Sample Rate: 1 GS/s (real-time)
• Channels: 2
• Record Length: 2,500 points per channel
• Vertical Sensitivity: 2 mV/div to 5 V/div
• Time Base Range: 5 ns/div to 5 s/div
• Trigger Types: Edge, video, external
• Display: 11.5 cm × 8.6 cm backlit LCD
• Acquisition Modes: Sample, Peak Detect, Average
• Storage: Save/recall waveforms and setups
• Interfaces: Optional RS-232, GPIB, and Centronics via TDS2CM module
• Weight: Approx. 2.9 kg

It’s a solid entry-level scope for electronics labs, education, and light industrial diagnostics. Want to compare it with the TDS 224 or a modern digital scope?

Frequency Range ~ 0.5~60Mhz

VSWR 1:1 to 9.9:1

Impedance ~ 0 to 300 Ohms

Interference Detection ~Built-in field-strength indicator with a

range of -30 to +20 dBm

Display 2-inch (5 cm) color TFT screen

Power Supply~ Built-in 3.7V, 1800mAh lithium-polymer

rechargeable battery

Physical Dimensions ~ Size: 6.9 cm (W) x 8.9 cm (H) x 2.5 cm (D)

Connector Type ~ BNC Female

The Finolex CAT6 4-Pair Cable is a high-speed Ethernet cable designed for reliable data transmission in LAN, broadband, and networking applications. It features 4 twisted pairs of high-quality copper conductors that reduce crosstalk and ensure stable performance for high-speed networks.

The Keysight 85024A is an active, high-impedance probe designed for non-intrusive, high-frequency voltage measurements in circuit nodes without disturbing the circuit operation. It is ideal for engineers working in RF and microwave design, particularly when measuring small signals in the presence of complex impedances.

The High Premium Audio Capacitor is a precision-engineered component designed specifically for high-fidelity audio applications. Built with superior materials and strict quality control, it ensures exceptional signal clarity, reduced distortion, and enhanced soundstage performance—making it ideal for audiophiles and high-end audio system designers.

• Type: High-grade film or electrolytic audio capacitor (based on version)

• Capacitance Range: Customizable (e.g., 0.1 µF – 1000 µF)

• Voltage Rating: Typically 50V to 630V (audio grade)

• Tolerance: ±5% or better for accurate frequency response

• Material Options:

  • Film Capacitors: Metallized polypropylene or polyester for clear, transparent sound

  • Electrolytic Capacitors: Low ESR aluminum for power filtering

• Leads: Tinned copper or OFC leads for optimal conductivity

• Acoustic Performance: Low microphonic effect and dielectric absorption

• Temperature Range: -40°C to +85°C or higher

• Aesthetic Design: Premium audio-grade casings with gold or silver markings

A 4 TO 4 COMBINER 698~2700 MHz is an RF device designed for balanced signal distribution across four channels. It ensures low insertion loss (1.0–2.0 dB) and high isolation (20–30 dB), making it ideal for cellular networks, Wi-Fi, and DAS (Distributed Antenna Systems).

This combiner supports power handling up to 100W and features N-type or SMA connectors for compatibility. Built with durable materials, it withstands harsh environmental conditions, ensuring reliable performance in complex RF systems. It is commonly used in telecom, broadcasting, and RF signal management to optimize signal transmission and minimize interference. Would you like help selecting the best model for your needs?

Beryllium copper fingerstock is a highly conductive, spring-like material used for EMI/RFI shielding in electronic enclosures. It is made from beryllium copper alloy, which provides excellent fatigue resistance, corrosion resistance, and electrical conductivity.

Fingerstock gaskets are commonly used in cabinet doors, access panels, shielded rooms, and grounding contacts. They come in various mounting styles, including clip-on, stick-on, snap-on, and soldered options. The material can be plated with gold, silver, nickel, or tin to enhance durability and compatibility with different surfaces.

The SMA 1W 2dB 3GHz attenuator from Synergy Telecom is a precision RF component designed to reduce signal strength by 2 decibels while maintaining signal integrity. It features SMA male-to-female connectors, supports up to 1 watt of continuous power, and operates across a frequency range of DC to 3GHz. With a 50-ohm impedance, it ensures seamless integration into standard RF systems.

This attenuator is typically connectorized and inline, meaning it plugs directly between two SMA ports—ideal for test setups, signal conditioning, or protecting sensitive equipment from overpowering signals. Its brass body construction offers durability and consistent performance in demanding environment.

The SMA 1W 1dB 3GHz attenuator by Synergy Telecom is a compact RF component designed to reduce signal strength by 1 decibel without distorting the waveform. It features SMA male-to-female connectors, supports up to 1 watt of power, and operates effectively across a frequency range of DC to 3GHz. With a 50-ohm impedance, it ensures compatibility with standard RF systems, and its brass construction offers durability and stable performance. This attenuator is typically used in test setups, communication systems, and RF circuits to manage signal levels and protect sensitive components.

The N F to N F 0-90 dB 10 dB Step Attenuator by Synergy is a high-precision RF component designed for signal attenuation in 10 dB increments, ranging from 0 to 90 dB. It features N-type female connectors, ensuring reliable connectivity and minimal signal loss. This attenuator is ideal for testing, calibration, and signal conditioning in RF and microwave applications. Built with high-quality materials, it offers low VSWR, excellent attenuation accuracy, and durability for long-term use. Commonly used in telecommunications, defense, and aerospace industries, it provides stable performance across a wide frequency range. 

The Agilent 33210A is a versatile 10 MHz function/arbitrary waveform generator designed for precision signal generation in lab and test environments. Here’s a quick rundown of its key features:

• Waveform types: Sine and square waves up to 10 MHz; triangle, ramp, pulse (up to 5 MHz), noise, and DC waveforms
• Arbitrary waveform capability: With Option 002, it supports 14-bit resolution, 50 MSa/s sampling, and 8K point custom waveforms
• Modulation: Built-in AM, FM, and PWM
• Sweep and burst modes: Linear/logarithmic sweeps and triggered bursts
• Amplitude range: 10 mVpp to 10 Vpp
• Interfaces: USB, GPIB, and LAN (LXI Class C compliant)
• External reference: Option 001 allows sync to a 10 MHz external clock

It uses direct digital synthesis (DDS) for low-distortion, high-stability output, and its intuitive front panel makes it easy to adjust frequency, amplitude, and offset. You can even enter values in Vpp, Vrms, dBm, or high/low levels.

Want to compare it with newer Keysight models or check pricing from Indian suppliers?