Synergy Telecom Private Limited

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

1. N Male to N Male Connectors: This fixture has N-type male connectors on both ends. N-type connectors are commonly used in RF and microwave applications due to their robustness and low loss characteristics.

2. Open Circuit: One part of the fixture is designed to simulate an open circuit (an open connection with no electrical continuity). This is used to check how the equipment handles a condition where there is no load.

3. Short Circuit: The other part of the fixture is designed to simulate a short circuit (a direct electrical connection with zero resistance). This is used to verify the equipment's response to a condition where there is a direct connection with minimal impedance.

1. Calibration: The open/short fixture is used to calibrate RF measurement equipment. By introducing known conditions (open and short circuits), you can calibrate instruments such as network analyzers to ensure they are reading accurately.

2. Verification: It helps in verifying the performance of RF components and systems. By measuring how the equipment responds to open and short conditions, you can assess its accuracy and functionality.

3. Troubleshooting: It aids in troubleshooting RF systems by providing known reference points to compare against the system’s performance.

• Open Test: Connect the fixture to the measurement equipment. The open circuit will present an infinite impedance to the equipment, which should be recognized and measured as such.

• Short Test: Swap the fixture to the short circuit setup. This presents a zero-ohm impedance to the equipment, which should be measured as a short.

1. Connect the Fixture: Attach the fixture to the RF measurement equipment using the N male connectors.
2. Perform Measurements: Use the equipment to measure the open and short conditions. This will involve capturing the reflection coefficients or other relevant parameters.
3. Adjust Calibration: Based on the measurements, adjust the equipment's calibration settings to ensure accurate readings under actual test conditions.

A BNC Male to SMA Female adaptor is a coaxial RF connector that allows you to connect a cable or device with a BNC male connector to one with an SMA female port.

• BNC Male (Plug) – The side with a bayonet-style locking mechanism (common in video, RF, and test equipment).

• SMA Female (Jack) – The side with an internally threaded connector (common in Wi-Fi, GPS, and high-frequency applications).

• Impedance: Typically 50Ω (standard for RF applications), but some may be 75Ω (common in video signals).

• Frequency Range: Up to 4 GHz (for SMA) or 2 GHz (for BNC), depending on quality.

• Connecting BNC-based test equipment (oscilloscopes, signal generators) to SMA-based antennas or RF circuits.

• Adapting video equipment (BNC) to wireless devices (SMA).

• • Extending or converting RF connections in lab setups.

The WR62 to SMA Female waveguide adapter is designed for high-frequency applications, operating in the 12.4 GHz to 18 GHz range. It features a WR-62 waveguide interface with an SMA female coaxial connector, ensuring low insertion loss and high signal integrity.

Key specifications:

• Waveguide Type: WR-62
• Connector Type: SMA Female
• Frequency Range: 12.4 GHz – 18 GHz
• VSWR: Typically 1.25:1 or lower
• Flange Type: UG-1665/U (Square Cover)
• Material: Aluminum or Brass with silver plating
• Application: Microwave, millimeter-wave, and test setups

The WR975 to N-Type Female waveguide-to-coaxial adapter is a precision RF component engineered for high-power, low-frequency applications. Here's a detailed description based on Synergy Telecom’s typical offering and industry standards:

• Waveguide Size: WR975 (also known as R9), compatible with FDP9 (UDR9) flange
• Connector Type: N-Type Female, 50 Ohm impedance
• Frequency Range: 0.76 GHz to 1.15 GHz
• VSWR: ≤ 1.3:1 for efficient impedance matching
• Insertion Loss: ≤ 0.2 dB, ensuring minimal signal degradation
• Power Handling: Supports high peak and average power levels
• Material: Aluminum body with chromate conversion inside
• Finish: Anti-corrosive grey or black paint on the exterior
• Operating Temperature: –40°C to +70°C
• Configuration: Right-angle or end-launch, depending on the model

This adapter is ideal for radar systems, RF test benches, satellite uplinks, and industrial microwave systems. Its rugged construction and low-loss performance make it a reliable choice for both lab and field deployments.

 
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 

N Female 4 Hole Crimp Connector For LMR 100 Cable
 
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 

We r experts in mfring antenna, Rf jumper, test, internal, external cables, antenna coaxial cable assembly with high pim and low vswr, DL, Duplexer,  Couplers , splitter,  Attenuator, BAIS TEE, waveguide 

A WR-62 waveguide to coaxial adapter enables efficient signal transition between rectangular waveguides and coaxial connectors, commonly used in microwave and RF applications. Operating within the 12.4 GHz to 18 GHz frequency range, these adapters are designed for minimal insertion loss and low voltage standing wave ratio (VSWR). They come with various connector types, such as SMA, Type-N, K-Type, and TNC, catering to diverse system requirements. Precision engineering ensures reliable power handling and optimal performance in telecommunications, radar systems, and satellite communications. Manufacturers like Fairview Microwave, ATM Microwave, and Pasternack offer high-quality WR-62 adapters for different industry needs.

DIN Female to N Male RF adapter:

1. Connector Types:

   • DIN Female: Threaded RF connector (typically 7/16 DIN or 4.3-10 DIN)

   • N Male: Standard 5/8"-24 threaded RF connector

2. Electrical Characteristics:

   • Impedance: 50Ω (standard for RF applications)

   • Frequency Range:

     • 7/16 DIN: 0-7.5 GHz

     • 4.3-10 DIN: 0-10 GHz

   • VSWR: Typically <1.25:1

3. Mechanical Specifications:

   • Body Material: Brass or stainless steel

   • Plating: Silver or gold over nickel

   • Coupling Torque: 1.5-2.5 Nm for DIN side

   • Operating Temperature: -55°C to +125°C

4. Performance Features:

   • Excellent RF shielding

   • Low insertion loss (<0.1 dB typical)

   • High power handling (up to 500W average for 7/16 DIN)

   • Weatherproof (IP67 rated versions available)

   •  

The WR284 waveguide adaptor is a precision-engineered component used to connect WR284 rectangular waveguides with coaxial connectors or other waveguide sizes. Designed for microwave frequencies between 2.60 to 3.95 GHz, it ensures minimal signal loss and high power transmission. Typically constructed from brass or aluminum, these adaptors feature flanges like CPR-284G and are compatible with various coaxial types such as N-type or SMA. They are widely utilized in satellite communication, radar systems, and RF testing environments. Durable and efficient, a WR284 adaptor is essential for seamless RF transitions in both laboratory and field applications. Compact and reliable, it boosts connectivity.

The Flex Twist IEC/EIA waveguide is a flexible, twistable waveguide designed for microwave communication and satellite transmission. It provides low VSWR and attenuation, ensuring stable signal transmission even during bending and twisting.

Key features:

• Flexible & twistable: Allows for easy installation and alignment.
• Low VSWR & attenuation: Maintains signal integrity.
• Protective jacket: Made from silicone rubber or polyester vulcanized rubber for environmental resistance.
• Standard flanges: Available in IEC and EIA WR sizes.

Synergy is Indian Antenna and RF Co-axial Cable assembly manufacturer. We deal in rf connector, rf Co-axial Cable, all types of antenna, antenna cables, jumper cables, microwave components, Attenuator, dummy loads, dc block, splitter, Duplexer, Couplers, Combiners, low pim test cables, tools, Ibs n DAS product, GPRS, rfid product's, Iot products, and 5g products for smart city,, pls confirm if any enquiry across..

The N Female Clamp Connector for RG58 Cable is a durable, high-performance RF coaxial connector designed for secure and stable cable termination. It offers excellent electrical performance and mechanical stability, making it ideal for use in communications, broadcast, and RF signal transmission applications.

• Connector Type: N-Type Female

• Termination Style: Clamp type (for field-installable cable assembly)

• Cable Compatibility: RG58 coaxial cable

• Impedance: 50 Ohms

• Frequency Range: DC to 11 GHz

• Body Material: Nickel-plated brass for enhanced durability and corrosion resistance

• Center Contact: Gold- or silver-plated brass for low contact resistance and high conductivity

• Insulator: PTFE dielectric for excellent electrical insulation

• Mating Style: Threaded coupling for secure and vibration-resistant connection

• Weatherproof: Suitable for indoor and outdoor use when properly installed

• Operating Temperature Range: -55°C to +85°C

Description
Impedance 50 Ω
Applicable up to 6 GHz
Synergy offering include
RF Cables: LMR 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.
RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.
RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.
RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.
RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna
Microwave Products: Attenuators, Splitters, Combiners, Couplers, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS
Waveguide Products: Straight, Bend, Twist, flexible, elliptical waveguides and waveguide parts like Tee, Transitions, Loads, Couplers, Isolators, Joints, Shorts etc.
Telecom Equipment: Complete range of telecom access equipment that include Wireless Home Gateways, Portable Hot Spot, M2M modules and solutions, Indoor and Outdoor Routers based on GSM, WCDMA and LTE Technologies.
Electronic Instruments: High end test equipment like LOW PIM Testers, Communication Test Sets for 2G/3G/4G.
Tools:  Complete range of tools, tool kits, and electronic instruments like Multi-meters etc. from reputed Taiwan Company.
Solar: Solar connectors(MC4, MC4 branch, diode connectors, fuse connectors, tools including crimping tools including hydraulic, wrench, cutting tools), DC and AC solar UV protected cables and cable assemblies.
Optical: All optical fibers, connectors and their patch chords, pigtails, attenuators, FDMS.

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ

Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.

Features:

Resistant to corrosion

Perfect finish

Long lasting life

Specification:

Electrical Characteristics:

Mechanical Cheracteristics:

 
Synergy Telecom is a diversified technologies company involved in the integration, manufacturing, installation of IBS and BTS sites in India. We are one of the growing company in the field of manufacturing of microwave components, Antenna in GSM, CDMA, WIMAX, GPS, and in ISM band in North India. We are keeping stock of all types of RF connectors, microwave components, Test Equipments for BTS/IBS and its jumper cables, Adapters, Attenuators, Baluns and Termination.
Features:
Resistant to corrosion
Perfect finish
Long lasting life

Specification:

Electrical Characteristics:
 
Impedance
50 ohms
Frequency Range
DC-7.5GHGZ
Voltage Rating
 
RG-55,58,141,142,223,303: 335 volts peak
RG-122,174,188,316: 250 volts peak
Dielectric Withstanding Voltage
 
0.141” & RG-58 group: 10000 VRMS
0.085” & RG-316 group: 750 VRMS.
VSWR
 
1.10 MAX
 
 
 
 
 
 

Mechanical Cheracteristics:
 
Mating
50 ohm coupling
Mating Torque
 
Recommended:2 inch pounds
Disengagement:2 inch pounds
Connector affixment to cable
Crimp types,Solder types
Cable affixment to center contact
Solder
Contact captivation
All types, except as noted
Connector durability

Body
250 mating and unmating cycles min.

Brass
 
 
 
 
 

Description
Impedance 50 Ω
Applicable up to 6 GHz
Synergy offering include
RF Cables: LMR 100/200/400/240/300/400; RG6/11/58/59/142/174/178/179/188/213/214/217/223/316/400, 1.13 mm etc. as also High Frequency Cables Suco 141/0.86/RG402/ 405/ SS402/ 405/ LL120/ 142/335 etc.
RF Connectors: N, DIN, BNC, SMA, TNC, MCX, MMCX, SMB, SMC, SSMA, SMZ, 1.6/5.6, 1.0/2.3, FME, UHF, RCA as also High Frequency Connectors 2.4mm/2.92mm/1.95mm/3.5mm/N/ SMA/ DIN/ APC7 etc.
RF Adaptors: N/L9/SMA/SMB/BNC/TNC/SMZ/MCX/DIN in various combinations of Male and Female including High Frequency adaptors 2.4/2.92/3.5mm etc.
RF Cable Assemblies & Jumpers: All kind of cable assemblies and jumpers including Precision High frequency Cable assemblies with customized combination of cable type, length and connectors with a fast turnaround time for custom cable assemblies.
RF Antennae: GSM Magnetic Antenna, USB Modem Antenna, Mobile Phone antenna and adapter, Patch Panel Antenna, Rubber Antenna, GPS antenna, Wi-Fi antenna
Microwave Products: Attenuators, Splitters, Combiners, Couplers, Power Dividers, Matching Transformers, High power dummy loads, DC Blocks, Multi way couplers, LPF, BPF, Duplexers, Lightning Arrestors, all infrastructure items for IBS and BTS
Waveguide Products: Straight, Bend, Twist, flexible, elliptical waveguides and waveguide parts like Tee, Transitions, Loads, Couplers, Isolators, Joints, Shorts etc.
Telecom Equipment: Complete range of telecom access equipment that include Wireless Home Gateways, Portable Hot Spot, M2M modules and solutions, Indoor and Outdoor Routers based on GSM, WCDMA and LTE Technologies.
Electronic Instruments: High end test equipment like LOW PIM Testers, Communication Test Sets for 2G/3G/4G.
Tools:  Complete range of tools, tool kits, and electronic instruments like Multi-meters etc. from reputed Taiwan Company.
Solar: Solar connectors(MC4, MC4 branch, diode connectors, fuse connectors, tools including crimping tools including hydraulic, wrench, cutting tools), DC and AC solar UV protected cables and cable assemblies.
Optical: All optical fibers, connectors and their patch chords, pigtails, attenuators, FDMS.

Frequency - DC-4Ghz
VSWR - 1.5
Impedance - 50ohm
Max. Power Hand. - 50w

Characteristic Impedance 50 ohm
Frequency Range DC-4Ghz
VSWR ≤1.15@DC-4GHz
Dielectric Withstanding Voltage ≥1000V RMS, 50Hz, at sea level
Dielectric Resistance ≥5000MΩ
Contact Resistance Center Contact ≤3mΩ
Outer Contact ≤2.5mΩ